Manual Tefal Freemove FV9920 (page 10 of 122) (All languages)

537719

Zoom out

Zoom in

1/122

Storing your iron

• Set the thermostat control to “MIN”. Disconnect the base and empty the tank – fig.23.

• Wait for the soleplate to cool – fig.24. Wind the cord around the iron and its base – fig.25.

• Carry the iron and the base with two hands – fig.26 and 27.

PROBLEM CAUSES POSSIBLES SOLUTIONS

Brown streaks come

through the holes in

the soleplate and

stain the linen.

You are using chemical descaling

agents.

Do not add any descaling agents to the water in the

water tank.

You are not using the right type of

water.

Perform a self-cleaning operation and consult the

section “What water to use?”

Fabric fibres have accumulated in the

holes of the soleplate and are burning.

Perform the self-cleaning operation and clean the

soleplate with a damp sponge. Vacuum the holes of

the soleplate from time to time.

The soleplate is dirty

or brown and can

stain the linen.

You are ironing with an inappropriate setting

(temperature too high).

Clean the soleplate as indicated above.

Select the appropriate setting.

Your linen has not been rinsed sufficiently

or you are using starch.

Clean the soleplate as indicated above. Always spray

starch onto the reverse side of the fabric to be ironed.

Your iron is releasing little

or no variable/TURBO

steam.

The water tank is empty. Fill the water tank.

The anti-scale valve is dirty. Clean the anti-scale valve.

Your iron has a build-up of scale. Clean the anti-scale valve and carry out a selfclean.

Your iron has been used dry for too long. Carry out a self-clean.

Your iron needs recharging. For optimum efficiency, place the iron on its base to

be recharged at each resting period.

You are not using the the variable steam

trigger.

Hold the variable steam trigger down while you iron

to obtain a constant flow of steam.

The variable steam has not been

activated.

Gently shake the iron in a horizontal position, while

holding down the steam trigger until the steam

output begins.

The soleplate is

scratched or damaged.

You have placed your iron flat on a

metallic rest-plate or ironed over a zip.

You have cleaned your soleplate with an

abrasive or metal pad.

Always set your iron on its base. Try to avoid ironing

over zips. Refer to the chapter “Clean the soleplate”.

Your soleplate is

releasing particles.

Scale is building up on the soleplate. Carry out a self-clean operation.

Water is running out of

the water tank flap.

You have not closed the water tank flap

properly.

Check that the water tank flap is locked properly.

Water drips from the

holes in the soleplate.

You have stored the iron horizontally,

without emptying it and without setting

it to MIN.

See the section “Storing your iron”.

The red light on the

display panel flashes

when the iron is on the

base.

Connection problem between the iron

and the base.

Check that the iron is pushed back completely and

connected to the base.

The spray does not spray. There is not enough water in the water

tank.

Fill up the water tank.

The base moves on the

ironing board.

The base has not been properly

connected to the EasyFix system or the

EasyFix system is not properly fixed to

the ironing board.

Check that the base is properly connected to the

EasyFix system and that the EasyFix system is

securely screwed onto the board.

Your iron is cooling down. You are not placing it on its base

regularly.

Place the iron on the base during each resting period

while you change your item of clothing.

If there is a problem

If you have any problem or queries, please contact our Helpline:

0845 602 1454 – UK / (01) 677 4003 – ROI or consult our website – www.tefal.co.uk

TEFAL621-Freemove_1800122940_Mise en page 1 09/02/12 14:04 Page7

How can I stop it dripping out brown liquid drops whilst I am ironing? Submitted on 7-9-2018 at 18:38
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tefal Freemove FV9920 in the language / languages: All languages as an attachment in your email.

The manual is 14,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tefal Freemove FV9920

Tefal Freemove FV9920 User Manual - Dutch - 10 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tefal Freemove FV9920 Manual

Product: