Manual Tefal Freemove FV9920 (page 9 of 122) (All languages)

537719

Zoom out

Zoom in

1/122

Using the TURBO and SPRAY function

• For the TURBO function, set the thermostat control to “MAX” or “•••”. Press the TURBO button from time to

time

– fig.12.

• When you dry or steam iron, press the SPRAY button several times to wet the fabric and remove resistant

creases

– fig.11.

Vertical steam ironing

• Hold the iron a few centimetres from the fabric to avoid burning delicate fabrics. Every five pulses

return the iron to a horizontal position.

• Hang the garment on a hanger and hold the fabric slightly taut with one hand. The steam is very hot, so you

should always do this with the garment on a hanger

– never iron clothes which someone is wearing – fig.15.

• Set the thermostat control to “MAX”.

• Press the turbo button in pulses

– fig.12 and move the iron from the top to the bottom – fig.15.

Additional functions

Autoclean Catalys

soleplate (according to model)

• Your iron is equipped with a self-cleaning soleplate which works by catalysis.

• Its exclusive coating continuously removes all impurities generated by normal use.

• It is recommended that you always place the iron on its base to preserve its self-cleaning coating.

Auto-Off safety (according to model)

• During normal use, the Auto-off light is off!

• The electronic system cuts the base power supply and the orange light located on the display panel flashes if

the iron remains still for more than eight minutes on the base.

• To restart the iron, simply press the RESTART button on the display panel

– fig.16.

Maintenance and cleaning

Cleaning the anti-scale valve (once a month)

• Be careful! Never touch the end of the rod. The iron will not function without the anti-scale valve.

• Disconnect the base and empty the tank – fig.17.

• To remove the anti-scale rod, set the thermostat at MAX, press the valve extraction button and pull

gently upwards

– fig.18.

• Let the rod soak for four hours in a glass of white vinegar or natural lemon juice – fig.19.

• Rinse the rod under tap water – fig.20.

• Reposition the anti-scale rod; push the valve until it clicks – fig.21.

Self-cleaning

• Self-cleaning delays scaling on the iron. To prolong the life of the iron, perform a self-clean once a

month.

• Plug in the base and reconnect your iron.

• Allow the iron to heat up on the base, with the tank full and the thermostat set to maximum.

• When the green light on the display panel stops flashing, take the iron and place it over a sink. Remove the

anti-scale valve (see previous chapter).

• Hold down the variable steam button and shake the iron gently and in a horizontal position, over the sink, until

some of the water (and the impurities) have drained through the soleplate.

• At the end of this operation, put the anti-scale valve back in place; push down until it clicks

– fig.21.

• Place the iron back on the base to dry the soleplate.

Cleaning the soleplate

Your iron has a self-clean soleplate (according to the model):

• Warning! Use of an abrasive cloth will damage the self-cleaning coating on the soleplate.

• Its exclusive active coating allows it to continuously remove all impurities that may be generated on a daily

basis during normal use.

• Ironing with an incorrect program can however leave traces that may require manual cleaning. In this case, it

is recommended that you use a soft damp cloth on the still warm soleplate so as not to damage the coating

–

fig.22.

Your steam iron is fitted with an Ultraglide soleplate (depending on model):

• Never use aggressive or abrasive products.

• When the soleplate is still warm, wipe with a damp cloth – fig.22.

TEFAL621-Freemove_1800122940_Mise en page 1 09/02/12 14:04 Page6

How can I stop it dripping out brown liquid drops whilst I am ironing? Submitted on 7-9-2018 at 18:38
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Tefal Freemove FV9920 in the language / languages: All languages as an attachment in your email.

The manual is 14,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Tefal Freemove FV9920

Tefal Freemove FV9920 User Manual - Dutch - 10 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Tefal Freemove FV9920 Manual

Product: