628134
6
Zoom out
Zoom in
Previous page
1/14
Next page
2.Press & hold the [VF] button with [ ] advancing to scan from one station to
another, staying on each station for about 5 seconds.
3.To stop the auto browse function, simply press the [VF] button.
Note: While operating the “Auto Browse Station” function, you can press the [M]
button anytime to store the station into memory, and the radio will keep on auto
browsing the next available station.
WORKING WITH STATION MEMORIES
There are total 550 preset memories within the unit. 100 preset memories for each FM,
MW, and LW band, and 250 for SW.
FM ATS:
1. Fully extend the telescopic antenna and press the [FM]
button to select FM band.
2. Press & hold the [FM] button with “PRESET ” flashing and
the frequency start running, then you can scan and store
your desired stations within the present band. When the
frequency stop running, it means the ATS operation has
been completed; then rotate the [TUNING] knob for those
scanned and stored stations.
MW/LW ATS:
Press the [MW] button to select MW/LW band, then follow step 2 of FM ATS.
SW ATS:
Fully extend the telescopic antenna and press the SW[ ] or [ ] button to select SW
band. There are two modes for SW ATS tuning:
Mode A: Press & hold the [ ] button to ATS the stations within all meter bands
Mode B: Press & hold the [ ] button to ATS the stations within present meter band
only.rotate the radio for better location (MW & LW).
Notes:
1. During ATS process in FM, MW / LW or SW (mode A), pre-stored radio stations
will be replaced automatically by the new searched stations.
2. With ATS in SW (mode B), those existing memories will not be replaced; all the
newly found radio stations would be stored in the blank memories addresses.
3. If there is too many interference in you surrounding or many mirror/blank station
being stored during ATS, you should contract the telescopic antenna (FM & SW)
or rotate the radio for better location (MW & LW).
METHOD 2: MANUAL STORING STATON
1. Select band and tune to your desired station.
www.tecsunradio.com hch@cantonmade.com
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tecsun PL606 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tecsun PL606 in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info