628134
5
Zoom out
Zoom in
Previous page
1/14
Next page
frequencies. you can easily tune into your desired stations from those preferred
frequencies.
1. Press the [ETM] button with [ETM] shows on screen to
enter Easy Tuning Mode.
2. Press & hold the [ETM] button until the frequency start
running to auto scan and store stations into ETM memory,
within the present band.
3. When the frequency stop running, turn around the
[TUNING] knob to select those stored stations.
Notes: While operating ETM to search for stations, a few stations might be missed if
there is interference in the surrounding. In this case, you can simply key-in the frequency,
then press the [ETM] button to manually store it into ETM memory.
Tips:
FM station: When you are in a different city or country, you should perform the ETM
function again in stead of using ATS function, because this will not delete any of the
stations already stored within the memory.
MW station: It is recommendable to perform the ETM function during night time, because
there are usually many stations starting broadcasting at night.
SW station: It is recommendable to perform the ETM function in the morning, afternoon
as well as night time, because the transmitting signal of SW is very unstable and usually
there are more stations that start broadcasting in the late afternoon.
METHOD 2: MANUAL TUNING
Frequency searching: Press the [VF] button to switch into frequency mode, and
then rotate the [TUNING] knob to select your desired station.
FAST/SLOW tuning is shown in the chart below for each band.
Slow tuning mode
Fast tuning mode
Step
Band
Turning step
Turning step
FM 0.01MHz
0.1MHz
MW 1kHz
9/10kHz
LW 1kHz
9kHz
SW 1kHz 5kHz
Memory searching: Press the [VM] button to switch into memory mode, and then rotate
the [TUNING] knob to select those stored stations.
METHOD 3: AUTO BROWSE STATION
1.Turn on the radio and press the [VF] button to switch into
frequency mode.
www.tecsunradio.com hch@cantonmade.com
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tecsun PL606 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tecsun PL606 in the language / languages: English as an attachment in your email.

The manual is 0,92 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info