628136
15
Zoom out
Zoom in
Previous page
1/21
Next page
Turn off the radio, long press [9/10kHz] button until "9kHz" or "10kHz" appear in the
display. By long pressing again, the alternative band step would be shown. The
temperature is also shown on screen at the same time.
In general practice, the frequency step of 10kHz is to be used for broadcasting MW(AM)
as well as the temperature in the degree of Fahrenheit () to be used in the North
America.
In order to provide convenience to the end users, the “10kHz” of frequency step is default
to be displayed with temperature in the degree of Fahrenheit () together as well as
"9kHz" to be displayed with temperature in the degree of Centigrade () together.
If the display shows "10kHz" with degree of Fahrenheit (), which means this
radio is set to 10 kHz step for MW(AM) with temperature in Fahrenheit () which is for
the North America region..
Turn LW on/off
Turn off the radio. Press and hold the [MW/LW] button until "LW ON" or "LW OFF" appears
in the displayIf " LW OFF" appears in the display, which means LW is turned off. If :LW
ON” appears in the display, which means LW is turned on.
Turn off the "Bi" sound
Turn off the radio, press and hold the [
] button until "OFF" or "ON" appears in the display;
If " OFF" appears in the display, which means "Bi" sound is turned off.
Turn on / off intelligent lighting function
This radio bears the intelligent lighting function which backlight would be on for 3 seconds
during tuning or any key to be pressed.
With radio is off, press & hold [ ] key, then symbol “OFF” being displayed and means this
intelligent lighting function is off. By pressing & hold [
] key again, symbol “ON” is
displayed and means the intelligent lighting function is on now.
Special note: After shutting off the intelligent lighting function, the [LIGHT/SNOOZE]
key is still workable for turning on or off the backlight.
Turning on / off the charging function
Press & hold [
] key , symbol of & to be shown and means
rechargeable batteries to be used and the charging to be started at the same time.
Press & hold [
] key , symbol of & to be lost on screen and means
regular batteries to be used and charging function to be turned off..
Special note: This radio is default to use regular batteries for supplying power,. In case
of using rechargeable batteries, you should switch radio to the status of rechargeable
batteries being used. The correct power capacity of rechargeable batteries would be
shown.
APPLYING THE INTELLIGENT CHARGING FUNCTION (Rechargeable batteries &
external power connectors are sold separately.
1. Under radio being in the powered off status, installing 3 x UM3 (AA) rechargeable
batteries , press & hold [
] key to display symbol & , this means
the charging function is on.
www.tecsunradio.com hch@cantonmade.com
15


Need help? Post your question in this forum.

Forumrules
1

Forum

tecsun-pl380

Reset search

  • How l can change the tuning step in fm sw mw lw in tecsun pl 380..his manual don't help Submitted on 25-10-2023 at 13:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tecsun PL380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tecsun PL380 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info