628136
14
Zoom out
Zoom in
Previous page
1/21
Next page
alarm again 5 minutes later.
To turn off the alarm
When the radio is turned on by the alarm function with radio, you can short press
[POWER] button to continue listening radio afterwards.
Short press [POWER] again to turn off the radio.
When the radio is on by alarm functions with buzzer, you can short press [POWER] button
to turn off the alarm.
DISPLAY MODE
OFF status: Short press [DISPLAY] button to view on Temperature, Alarm time.
ON status: Short press [DISPLAY] button to view on Alarm time, Temperature, Local time,
signal strength/ SNR.
USING THE LOCK BUTTON
Long press [
] button with a long "B- -" sound and the " " symbol appears in the
display to lock up all keys / buttons.
Long press [
] button again with a "B" sound to unlock it.
USING THE LIGHT BUTTON
Short press [LIGHT] button with a "B" sound, LCD backlight illuminates for 3 seconds.
Long press [LIGHT] button with a long "B- -" sound, LCD illuminates permanently.
Short press [LIGHT] button again with a "BB" sound to turn off it.
FM ST. (FM STEREO) BUTTON
Short press [FM ST.] button when in the FM band to turn the radio on or off of stereo mode.
When it's in stereo mode, "
" appears over the left side of the frequency in the display
once it receives the FM stereo station. As long as you are not using headphones or
earphones, it can be left in mono mode.
AM BW (BANDWIDTH) BUTTON
Short press [AM BW] button to choose 6, 4, 3, 2, 1 kHz bandwidth. This may help to
reduce interference on some frequencies. Using WIDE usually results in better audio
fidelity, while using narrow limits the audio fidelity is somewhat dull in sound. You can
use it in MW, LW and SW band.
SYSTEM SETTING
Frequency range setting for FM
Turn off the radio, long press [FM SET] button, until 87.5-108MHz, 64-108MHz,
76-108MHz, or 87-108MHz appears in the display. Quickly keep pressing on the [FM SET]
button to select suitable frequency range for your local FM.
Changing the clock format
Turn off the radio, long press [12/24] button, until " 12 "or " 24 " appears in the display. If "
12" appears in the display, which means the clock system will be in the 12 hour format.
MW(AM) step setting
www.tecsunradio.com hch@cantonmade.com
www.tecsunradio.com hch@cantonmade.com
14


Need help? Post your question in this forum.

Forumrules
1

Forum

tecsun-pl380

Reset search

  • How l can change the tuning step in fm sw mw lw in tecsun pl 380..his manual don't help Submitted on 25-10-2023 at 13:45

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tecsun PL380 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tecsun PL380 in the language / languages: English as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info