628128
13
Zoom out
Zoom in
Previous page
1/16
Next page
1118
Temp.
To store a station manually
1. Turn on your radio, and tune into your favorite station.
2. Short press [M] button with a "B" sound.
3. Short press [M] button again to confirm with a long "B--"
sound.
DISPLAY MODE
USING THE LOCK BUTTON
Long press [ ] button with a long "B- -" sound and the
" " symbol appears in the display to lock up all keys/
buttons.
Long press [ ] button again with a "B" sound to unlock it.
USING THE LIGHT BUTTON
Short press [LIGHT] button with a "B" sound, LCD backlight
illuminates for 3 seconds.
Long press [LIGHT] button with a long "B- -" sound, LCD
illuminates permanently.
Short press [LIGHT] button again with a "BB" sound to turn
off it.
FM ST. (FM STEREO) BUTTON
Short press
To store station with auto scanning function
1. Short press the [SCAN MODE] button with a "BB" sound
into frequency status.
2. Long press [SCAN MODE]
button with a "B" sound to
activate the Auto-scan function.
3. If you want to store that station,
simply press on the [M] button
to store the station with a long
"B--" sound. Keep store up your
stations when auto search is
activated until it is done.
Timer
SLEEP
Frequency
changing
Auto-scan with pre-listening
flashing
Special note:
1. During ATS processing in FM, MW, LW and SW with
mode A, pre-stored radio stations would be deleted &
covered automatically by the new searched stations. If
ATS is interrupted or being turned off during process, for
those radio stations without deleted & covered by ATS
would still be kept.
With ATS mode B in SW, those existing memories will not
be deleted & covered; all the newly found radio stations
would be stored in the blank memory addresses.
2. If there is interference found in surroundings area and
ATS is not function properly, lower down the telescopic
antenna to restart the ATS again. (For Turning the radio
body around to other directions in order to receive better
in MW / LW).
If [M] button is not to be pressed again within 3 seconds
to confirm the storing, this radio would confirm it
automatically by a long "B--" sound.
OFF status: Short press [DISPLAY]
button to view on Temperature,
Alarm time.
ON status: Short press [DISPLAY]
button to view on Alarm time,
Temperature, Local time, signal
strength/ SNR.
Short press [FM ST.] button when in the FM band to take
the radio in or out of stereo reception mode. When it's in
stereo mode, " " appears over the left side of the
frequency in the display. As long as you are not using
headphones or earphones, it can be left in mono mode.
www.tecsunradio.com hch@cantonmade.com
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tecsun PL310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tecsun PL310 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info