628128
12
Zoom out
Zoom in
Previous page
1/16
Next page
AM BW (BANDWIDTH) BUTTON
Short press [AM BW] button to choose 6, 4, 3, 2, 1 kHz
bandwidth. This may help to reduce interference on some
frequencies. Using WIDE usually results in better audio
fidelity, while using narrow limits the audio fidelity somewhat.
You can use it in MW, LW and SW band.
10
19
TO STORE STATION
There are total 500 preset memories within PL-310. For
FM, MW, and LW, each band has 100 preset memories;
and 200 preset memories for SW.
1) ATS (Auto Tuning Storage) on FM
1. Turn on the radio, and fully extend the antenna.
2. Short press [FM] button to select FM band.
3. Long press on [FM] button with a "B" sound and
frequency is running on the display. All the available
stations will be stored in the memory automatically. After
the long "B--" sound to be heard, ATS is completed and
is in the status of memory address.
4. Then use the [TUNING] knob to tune around for those
stored stations.
MW, LW or SW ATS is as same as the FM ATS.
SYSTEM SETTING
Frequency range setting for FM
Turn off the radio, long press [FM SET] button, until 87.5-
108MHz, 64-108MHz, 76-108MHz, or 87-108MHz appears
in the display. Quickly keep pressing on the [FM SET]
button to select suitable frequency range for your local FM.
Changing the clock format
Turn off the radio, long press [12/24] button, until " "or
" " appears in the display. If " " appears in the
display, which means the clock system will be in the 12 hour
format.
Turn off the radio, long press [9/10kHz] button until "9kHz"
or "10kHz" appears in the display. By long pressing again,
the alternative band step would be shown. The temperature
is also shown on screen at the same time.
In general practice, the 10kHz is to be used for broadcasting
MW(AM) as well as the temperature in the degree of
Fahrenheit ( ) for the North America region.
In order to provide convenience to the end users, the
"10kHz" is default to be displayed with temperature in the
degree of Fahrenheit ( ) and for "9kHz" to be displayed
with temperature in the degree of Centigrade ( ) together.
If the display shows "10kHz" with degree of Fahrenheit ( ),
which means this radio is set to 10 kHz step for MW(AM)
with temperature in Fahrenheit ( ).
MW(AM) step setting
Method 4:
Method 5: Auto-scan memory (see page12)
Method 6: (see
page 12)
Manual memory search (see page 12 )
Direct key in the station address number
2) ATS (Auto Tuning Storage) on MW or LW
1. Press & release [MW/LW] button to select MW or LW.
2. Press & hold [MW/LW] button and followed a "B" sound
and ATS starts to scan the radio stations in MW or LW.
3)ATS (Auto Tuning Storage) on SW
1. Fully extended the antenna, then press and release SW
[ ] or [ ] button to select SW.
2. There are mode A & mode B in SW.
Mode A: press & hold [ ] button to scan all radio stations
within all meter bands.
Mode B: press & hold [ ] button to scan all radio stations
in present meter band only.
ATS (Auto Tuning Storage) on FM, MW, LW or SW band
www.tecsunradio.com hch@cantonmade.com
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tecsun PL310 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tecsun PL310 in the language / languages: English as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info