640544

Tecomec Super Jolly TL150 Manual

12
Zoom out
Zoom in
Previous page
1/66
Next page
ENGLISH
12
Issued by the Technical Assistance and Publications Office
ALL RIGHTS RESERVED
A copy of this manual is delivered with each grinder.
NB: The descriptions and illustrations contained in this manual are not binding. The manufacturer reserves the right to bring about
any modifications without updating the handbook.
ELECTRICAL CHAIN GRINDER
super jolly
230Vac -
super jolly
120Vac
MACHINE CHARACTERISTICS:
- Manufacturer: Tecomec SpA - Via Secchi, 2 - 42011 Bagnolo in Piano - Reggio Emilia - ITALY
- Machine: Electrical chain grinder
super jolly
DATA AND MODELS:
- Models:
super jolly
230Vac –
super jolly
120Vac
- Installed power: single-phase electrical motor 50Hz 214
W, voltage 230Vac - 60Hz 285-300W, voltage 120Vac
- Grinding wheel dimensions: external diameter 145mm, internal diameter 22.3mm
- Thicknesses: 3.2 – 4.7 – 6 mm
- Maximum speed: 3400 min
-1
- Type of lamp: 15W for 230Vac and 120Vac models
- Sound pressure level: 79dB (A)
- Level of vibrations transmitted to the handle: <2,5 m/S
2
- Chain types: pitches 1/4” – 325” – 3/8” – 404” – 1/4” (3/4”available with special grinding wheel and vise)
- Complete machine weight: 74N (7.5 kg)
- accessories supplied: grinding wheels (thickness 3.2 - 4.7 - 6 mm); 1 wrench ex. 4 for disassembly the auxiliary shield; 1 wrench
ex. 5 for disassembling the spring; 2 bolts for fastening the machine; 1 grinding wheel dresser; 1 template.
INTRODUCTION:
Keep this handbook with care.
To ensure the correct use of the grinder and to prevent accidents, do not start working without having read this handbook carefully.
This handbook explains the operation of the machine components and provides instructions for carrying out the checks and maintenance
required.
WARNING – Any maintenance operations not described in this handbook must only be carried out by an authorized service center.
To guarantee the efficient and consistent operation of your grinder, worn or broken parts must only be replaced using ORIGINAL SPARE
PARTS.
SAFETY RULES:
WARNING – When correctly used, your grinder is a fast, easy, and efficient work tool. For pleasant and safe working, carefully
comply with the safety rules listed below, as well as with those provided throughout the handbook.
1. The grinder must only be used by adults. Users must be in good physical condition and familiar with the instructions for use.
2. Never wear rings, bracelets and/or loose clothing that could come into contact with the grinding wheel.
3. Always wear gloves and protective eyewear while operating the grinder and while sharpening the wheel.
4. Never stop the grinding wheel with your hands, even after turning off the motor.
5. Check that the plug is disconnected when fitting the grinding wheel and during maintenance or transport.
6. Never start the grinder without the wheel guard in place (photo 6) – the supplied main guard is installed on the grinder and must
be removed only in case of any replacement.
7. Check that the voltage and frequency indicated on the grinder’s data tag correspond to the mains values.
8. Never use defective or non-standard cables, plugs or extension cables.
9. Remove the plug from the mains immediately if the cable is damaged or cut. For cable repair or replacement, contact your authorized
dealer or service center. The power supply cable is complete with terminals – with protection. For internal electrical connection insert
the feeding cable terminals directly into the switch. The electrical connection to the mains must be made in order to prevent damages
by people or vehicles which could endanger both their safety and yours.
10. Before starting up the grinder, check that the working area is free of tools or other objects.
11. Check the cable position during operation, making sure that it remains outside the grinding wheel operating area and that it is not
energized. Never work near other electrical cables.
12. Never advance the chain with your left hand until the grinding wheel has moved entirely outside the working area.
13. Do not allow other people to remain near the grinder during its operation or to touch its supply cable.
14. Always keep the hand-grips clean and dry.
15. Before starting the grinder, check that the grinding wheel is correctly secured and out of the working area.
16. To work with the machine, check that it is properly secured, on a bench or to the wall.
17. Always work in a stable and safe position, and be particularly careful.
18. Always comply with maintenance instructions.
19. Before using the grinder, check that all safety (and other) devices are properly working.
20. Never work with a damaged, improperly serviced/ fitted or arbitrarily modified grinder. Do not remove, damage, or neutralize
any safety devices.
21. Use only the grinding wheels indicated in the chains table at the end of the handbook (columns M and N).
22. Never use the grinder as a cutter or for grinding objects other than saw chains.
23. Only lend your grinder to expert users who are familiar with its operation and correct use.
24. Store your grinder in a dry place, raised off the ground. Keep it away from children.
25. Never let your grinder in the rain or in wet environments.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tecomec Super Jolly TL150 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tecomec Super Jolly TL150 in the language / languages: All languages as an attachment in your email.

The manual is 1,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info