486783

Technomate TM-7102 HD Manual

14
Zoom out
Zoom in
Previous page
1/42
Next page
Through this function, the receiver searches for
all the available channels and saves them in
memory.
- Auto Scan
1. When the Quality is at its highest level, press
the YELLOW( ) button on the remote
control to start scanning for channels.
- Manual Scan
1. Select the channel number or frequency that
you want to search by using the UP/DOWN
buttons on the remote control, manually
enter a frequency.
2. For Bandwidth, choose either 7 MHz or 8MHz
For Search Type, choose from : All Channel,
FTA Only or TV Only.
3. For Network Search, select ON to find the
most channels available. The Strength and
Quality of the signal from the selected
channel is shown by the Level and Quality
indicators at the bottom of the screen.
4. Antenna Supply 5V : Select antenna booster
power ON / OFF.
5. Press the OK button to start scanning.
www.technomate.com
24 25
Your Digital Partner for Life
5. Scan : Press Red ( ) button on the remote to begin satellite search.
6. Add TP : Press Green ( ) button on the remote to add new transponders by
using numeric buttons 0~9 and / buttons on the remote.
7. Delete TP : Press Yellow ( ) button on the remote to delete transponders.
Terrestrial Scan
Edit the information of the current transponder
PID/Audio PID/PCR PID and search the satellite.
1. Press the MENU button on the remote to
display the main menu.
2. Use / and / buttons on the remote to
move in the menu.
3. Select PID Search, then the PID Search menu
will be displayed.
- Satellite : Select a transponder which you want to
search.
- Transponder : Displays the Transponders of the selected satellite.
- Symbol Rate : Displays the current symbol rate list of the selected transponder.
- Polarization : Select Vertical/ Horizontal.
- Video PID / Audio PID / PCR PID : Select and edit by using numeric buttons 0~9 and /
buttons on the remote.
4. Scan : Press Red ( ) button on the remote to begin PID Search.
5. Add TP : Press Green ( ) button on the remote to edit transponder by using
numeric buttons 0~9 and / buttons on the remote.
6. Delete TP : Press Yellow ( ) button on the remote to delete the selected
transponder.
* Note : Setup is now completed. If you cannot see programme after finishing these procedures, please contact your local
dealer.
PID Search
1. For Provider choose either Canal Digitaal or
TV Vlaanderen.
2. For CHs Renumber select ON/OFF
3. Press the Red( ) button.
Fast Scan
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technomate TM-7102 HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technomate TM-7102 HD in the language / languages: English, French as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info