486783
12
Zoom out
Zoom in
Previous page
1/42
Next page
1. Select USALS on DiSEqC Motor, the USALS
menu will appear.
- Satellite : Select any satellite by pressing /
buttons.
-
Tuner : Select Both(Tuner1) / Both(Tuner2).
- Transponder : Display the current TP value of the
selected satellite.
- DiSEqC Motor : Select DiSEqC Motor USALS.
- Move : Move the dish position to West/East by
pressing / buttons.
- Motor Control : Control Motor by press OK button
on the remote.
Goto Reference : Goto reference by pressing OK
button.
Delete Limit : Delete limit by pressing OK button.
Enable Limit : Enable the saved east and west limit.
Set East Limit : Edit & Save east limit by pressing /
or OK buttons.
Set West Limit : Edit & Save west limit by pressing / or OK buttons.
- Sat Degree : Displays the current degree of the selected satellite.
Edit degree by pressing / buttons and numeric buttons.
Goto Reference : Move the dish to the 0 position.
Antenna Longitude : Edit antenna longitude by pressing / buttons and numeric buttons.
Antenna Latitude : Edit antenna latitude by pressing / buttons and numeric buttons.
- Go To : Save the current setting of USALS System.
2. Scan : Press Red ( ) button on the remote to begin satellite search.
3. Auto Navigation : Press Green ( ) button the remote to begin auto navigation.
* Note : When you change each parameter, you need to know exact parameter of the LNB to modify L.O(local oscillator)
frequency.
1. Select DiSEqC 1.2 on DiSEqC Motor, the
DiSEqC 1.2 menu will appear.
- Satellite : Select any satellite by pressing /
buttons.
- Tuner : Select Both(Tuner1) / Both(Tuner2).
- Transponder : Displays the current TP value of the
selected satellite.
- DiSEqC Motor : Selected DiSEqC 1.2
- Move : Move the dish position to west/east by
pressing / buttons.
- Move Fine : Move the dish position 1 step at a time
to west/east by pressing / buttons.
- Motor Control : Control motor by press OK button
on the remote.
Recalculate : Recalculate the position of all other
saved satellites relative to the known
position.
Reset System : Reset the position of all saved
satellites.
Goto Reference : Move the dish to the 0 position.
Delete Limit : Delete east and west limit.
Enable Limit : Enable the saved east and west limit.
Set East Limit : Edit & Save east limit by pressing / or OK buttons.
Set West Limit : Edit & Save west limit by pressing / or OK buttons.
- Go To : Go to the position of the saved satellite.
- Save : Save the current setting of DiSEqC 1.2 system.
2. Scan : Press Red ( ) button on the remote to begin satellite search.
3. Auto Navigation : Press Green ( ) button on the remote to begin auto
navigation.
www.technomate.com
20 21
Your Digital Partner for Life
DiSEqC 1.2 Setup USALS System Setup
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technomate TM-7102 HD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technomate TM-7102 HD in the language / languages: English, French as an attachment in your email.

The manual is 2,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info