801370
7
Zoom out
Zoom in
Previous page
1/40
Next page
GB 2
ALARM SETTING
Press and hold the ALARM button for 2 seconds, the AL icon appears on the display, the hour digits flash. Press the
SET/RESET button to set the desired alarm hours.
Press the ALARM button again, the minute digits flash. Press the SET/RESET button to set the desired alarm minutes.
Press the ALARM button again to store the alarm settings and return to normal time display. The clock will return to normal mode
in around 30 seconds if no further press of any other buttons.
Turn on or off the alarm
Single press the SET/RESET button during normal time display to turn on or off the alarm. When the alarm function is turned on the
icon appears on the display on top of the time digits.
Snooze function
When time reaches the set alarm time, the station will give a beep sound to wake you up. The icon will flash.
Press the SNOOZE/CH/REGISTER button once to stop the alarm temporarily, the snooze icon Zz keeps flashing. The alarm will
beep again after snooze duration of 6 minutes.
To stop the alarm, press any button except the SNOOZE/CH/REGISTER button when alarm is beeping. The snooze icon Zz
disappears. The alarm will beep again same time next day.
Note: Alarm duration is approximately 2 minutes.
TEMPERATURE DISPLAYS
The INDOOR temperature displays the temperature of the location of the temperature station.
The OUTDOOR temperature displays the temperature of the location of the outdoor temperature sensors (outdoor area or another
indoor rooms p.e. cellar, loft, etc.).
Outdoor transmitter reception and signal indicator
After the station is powered up, it starts to search for outdoor transmitter signal. The icon flashes. To start the reception of
outdoor transmitter signal manually, press and hold the SNOOZE/CH/REGISTER button for 2 seconds.
Receiving signal ( icon flashing)
Successful reception ( icon becomes static)
Failed reception ( icon disappear)
Press the SNOOZE/CH/REGISTER button once to display continually the temperature of only one outdoor sensor (1 channel).
Press the SNOOZE/CH/REGISTER button repeatedly to display sequentially the temperatures of all outdoor sensors (channel 1, 2
and 3).
Press the SNOOZE/CH/REGISTER button repeatedly until the icon is shown. The temperature display will switch automatically
between all 3 outdoor sensor channels (channel 1, 2 and 3). Press the SNOOZE/CH/REGISTER button to cancel.
°C/°F Display
Press and hold the SELECT button for 2 seconds, the temperature display format °C/°F flashes. Press the SET/RESET button to
select the °C (Celsius) or °F (Fahrenheit) temperature display format. Press the SELECT button again to store the setting.
Temperature trend indicator
The indoor and outdoor temperature trend indicators are updated every 30 minutes. These trend indicators represent the
temperature changes over the past three hours:
Temperature rose more than 1°C (2°F) in the past three hours.
Temperature has not changed more than 1°C (2°F) in the past three hours.
Temperature fell off more than 1°C (2°F) in the past three hours.
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS9767 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS9767 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1.08 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info