Manual Techno line WS9767 (page 6 of 40) (English, German, Dutch, French, Italian, Portuguese, Spanish)

801370

Zoom out

Zoom in

1/40

GB 1

WS9767 - INSTRUCTION MANUAL

TEMPERATURE STATION WITH RADIO CONTROLLED CLOCK AND ALARM

QUICK SETUP

 Keep the temperature station and outdoor sensor next to each other. Slide open the battery

cover at the back of the outdoor sensor. Make sure the channel selector is set at position CH1

(when using multiple transmitters: for second transmitter CH2, for third transmitter CH3), then

insert 2 x AAA batteries (not included) into the outdoor sensor by observing the correct

“+/-“ polarity signs inside the battery compartment. Replace the battery door.

 Slide open the battery cover at the back of the temperature station, then insert 2 x AA batteries

(not included) by observing the correct “+/-“ polarity signs inside the battery compartment. Then

replace the battery cover.

 Peel off the protective label on the front. The temperature station is ready to work for you.

The temperature station will receive data signal from the outdoor sensor in few seconds. Then place

the outdoor sensor in a dry and shaded area outdoor.

DCF SIGNAL RECEPTION AND SIGNAL INDICATOR

The time base for the radio controlled time is a Cesium Atomic Clock operated by the Physikalisch Technische Bundesanstalt

Braunschweig which has a time deviation of less than one second in one million years. The time is coded and transmitted from

Mainflingen near Frankfurt via frequency signal DCF-77 (77.5 kHz) and has a transmitting range of approximately 1,500 km. The

clock of the temperature station receives this signal and converts it to show the precise time in summer or wintertime.

The quality of the reception depends greatly on the geographic location. In normal cases, there should be no reception problems

within a 1500 km radius around Frankfurt.

After the temperature station is powered up, it starts to receive DCF signal. The icon flashes.

Receiving DCF signal ( icon flashing)

Successful reception ( icon becomes static)

Failed reception ( icon disappear)

Note: The DCF-77 reception is only available in Europe. Outside the reception range the clock of the temperature station is usable

as normal quartz clock.

MANUAL TIME SETTING

 Press and hold the CLOCK button for 2 seconds, the time display format 24Hr flashes. Press the SET/RESET button to select

the 12h or 24h time display format.

 Then press the CLOCK button again, language for weekday display GE flashes. Press the SET/RESET button to select the

language for weekday display (GE – German, FR – French, SP – Spanish, IT – Italian, EN – English).

 Then press the CLOCK button again, time zone digit O flash. Press the SET/RESET button to select the time zone (± 12h).

 Then press the CLOCK button again, the hour digits flash. Press the SET/RESET button to set the hours.

 Then press the CLOCK button again, the minute digits flash. Press the SET/RESET button to set the minutes.

 Then press the CLOCK button again, the year digits flash. Press the SET/RESET button to set the year.

 Then press the CLOCK button again, the month digits flash. Press the SET/RESET button to set the month.

 Then press the CLOCK button again, the date digits flash. Press the SET/RESET button to set the date.

 Press the CLOCK button again to store the settings and return to normal time display. The clock will automatically return to

normal mode in around 30 seconds if no further press of any other buttons.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS9767 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 1.08 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Techno line WS9767 Manual

Product: