801363

Techno line WS6832 Manual

12
Zoom out
Zoom in
Previous page
1/56
Next page
GB 5
Failed Reception ( icon disappear)
During reception, press / WAVE once will display reception mode and signal strength
Indication:-
When strong DCF signal is detected, display shows with 3 bars
When weak or no DCF signal is detected, display shows or
During reception, the signal strength may move from 1 bar to 2 bars to 3 bars. This is normal since
the clock is detecting DCF signal and other signals in the air at the same time.
Press SET will return to the time display with icon flashing.
Successful reception or failed reception
icon becomes static on (stop blinking) when reception is successful
icon disappears when reception is failed
Automatic reception and Manual Reception
Your clock starts automatic reception everyday at 1:00, 2:00, and 3:00. If it fails to receive the DCF
time signal at 3:00, it will start reception at 4:00. If it fails again, it will start reception at 5:00. If it
fails again, it will start automatic reception at 1:00 again in the next day.
Manual reception: simply press and hold / WAVE, your clock will gives a short beep and starts
manual reception. Press and hold / WAVE to stop DCF reception.
When your weather station is receiving the radio controlled time signal, the display will turn dimmer. It
will resume to the brightness level which you originally selected after the radio controlled time
reception is completed.
During RCC reception, all buttons do not function and it does not take temperature measurement.
The temperature readings will get stable and become more accurate after your weather station clock
is powered up for around 30 minutes.
To cancel DCF reception permanently
Press and hold / WAVE and at the same time for 2 seconds, your clock will give 2 short beep
and the radio controlled function is permanently disabled.
To resume the radio controlled function, press and hold / WAVE and at the same time for 2
seconds, your clock will give 2 short beep and will start DCF immediately.
TO SET TIME
1. Press and hold SET, 00 flash, press / to set the time zone: -01 or 00 or 01.
“00” = GMT +1 hour (e.g. Germany)
“01” = GMT +2 hours (e.g. Finland)
“-01” = GMT 00 hour (e.g. U.K.)
2. Press SET again, hour digits flash. Press / to set the current hour. Press and hold
or to accelerate setting at high speed.
3. Press SET again, the minute digits flash. Press / to set minutes. Press and hold or
to accelerate setting at high speed.
… 12 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS6832 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS6832 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 1.37 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info