Manual Techno line WS6449 (page 11 of 62) (English, German, Dutch, French, Italian, Polish, Spanish)

801423

Zoom out

Zoom in

1/62

GB 3

 Once the Channel numbers on weather station and sensor are the same, proceed by opening the battery

cover at the back of your wireless sensor and insert 2 x AAA new alkaline batteries to the battery

compartment. Replace the battery cover.

 Your weather station will receive the data signal from the outdoor transmitter in a few seconds.

 Place your outdoor transmitter in a dry and shaded area once the weather station receives the data of this

sensor.

Note:

 If the weather station is used with 2 or 3 transmitters, press “CH” button shortly to display Channel 1,

Channel 2, Channel 3 or cyclic display.

 In cyclic display, the channel will be changed every 25 seconds in overview all channels in a short period of

time

Deleting sensors / clearing channels

 Press and hold the “CH” button for 3 seconds to clear the current channel to re-register

Display / Keys Details:

There are six function buttons:

DCF Reception icon with full signal strength will appear on screen if the reception of atomic time is

successful.

 In normal display mode, press this “-/RCC” button to start/stop time searching (DCF).

 The tower icon will show solid when the station has received the DCF signal.

 No tower icon displayed. The station was unable to receive a signal at this time.

Reposition the station for better signal reception and wait an overnight.

automatically receive Hours: Daily 1:00,2:00,3:00,4:00,5:00 DCF automatically receive, at any time once

received 3,4,5:00 no longer receive the same day

Only if the unit receives summer time, it will display the “DST” icon.

 If there is no signal or too much interference the receiver will only be on for 2 minutes.

 If the signal is good it may catch a signal in ABOUT 2-3 minutes.

 If the signal is marginal it will try to catch a signal for up to 10 minutes.

Manual Time Setting:

 Press and hold the “SET” button for 3 seconds in normal display mode to enter time setting mode.

 12Hr or 24Hr will flash. Press the “+” or “-“ button to select between the 12-hour or 24-hour time format.

Press the “SET” button to confirm and continue.

 The time zone will flash on the display. Press the “+” or “-“ button to set the desired time zone( setting

range is 0~ +12,0~ -12). Press the “SET” button to confirm and continue.

 The hour will flash. Press the “+” or “-“ button to select the hour. Press the “SET” button to confirm and

continue.

 The minutes will flash. Press the “+” or “-“ button to select the minutes. Press the “SET” button to

confirm and continue.

 The year will flash. Press the “+” or “-“ button to select the year. Press the “SET” button to confirm and

continue.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS6449 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.06 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Techno line WS6449 Manual

Product: