801423
10
Zoom out
Zoom in
Previous page
1/62
Next page
GB 2
LCD Display:
Quick setup
Keep your weather station and wireless outdoor transmitter next to each other.
Make sure the Channel selector switch on sensor is at 1 position.
Open the battery cover at the back of your wireless outdoor transmitter and insert 2 x AAA new alkaline
batteries to the battery compartment. Replace the battery cover.
Connect the included power supply with the socket on the backside of the weather station or alternatively
you can use batteries: Open the battery cover at the back of your weather station and insert 2x AAA new
alkaline batteries to the battery compartment. Replace the battery cover. Please note, without adapter and
only batteries the backlight is always set off and you need to press the SNOOZE/LIGHTbutton to turn on
backlight for 10 seconds.
Make sure Channel 1 is displayed on the weather station. Your weather station will receive data signal
from the outdoor transmitter in a few seconds.
Place your outdoor transmitter in a dry and shaded area once the weather station receives the data of this
sensor.
Power On:
Display full segment for 2 second.
The weather station searching starts wireless sensor via 433MHz.
If the outdoor temperature is not displayed after 3 minutes, hold the CH button on the main unit to search
for outdoor sensor. Then press the TX button on the sensor to send signal. If it still does not receive the
outdoor temperature, remove the batteries from the transmitter and go back to step 1 of the set up
Sensor Reception
Press and hold the CH/+ button for 3 seconds while viewing an empty channel to search for the sensor.
The strength signal icon will flash until the sensor signal is received or for 3 minutes if no signal available.
Adding additional sensors
Make sure Channel 2 or 3 is displayed on the weather station. Press the “CH” button to change channels
on the weather station.
Make sure the Channel selector switch on the sensor is at 2 or 3 position
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Techno line WS6449 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Techno line WS6449 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 2.06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info