Manual Technivorm KB741 (page 9 of 48) (French, Spanish)

120929

Zoom out

Zoom in

1/48

8. Switch the power switch to the “on” position.

· Thermal carafe model: The orange light will illuminate when the

thermal carafe is placed properly against the white button.

· Glass carafe models with a hot-plate adjustable switch:

Set hot-plate switch to the HI position,

lower when pot reaches ½ full, or if you

prefer a less warm holding temperature.

9. The brew process will quickly begin; water will be brought to a

boil, rising through the brewer across the outlet arm and into the

brew-basket. Brew process is complete in 4 – 6 minutes.

10. We recommend disposing of coﬀee grounds once brew cycle

is complete.

· For models with adjustable brew-baskets: Move the slide to closed

position prior to emptying.

11. The brewer should be switched oﬀ after use.

• Thermal carafe models:

· The heating element is not receiving power unless the water

reservoir is full, engaging the ﬂow-switch, and the white button is

depressed; the only power consumption is at the power switch itself,

resulting in a very energy-eﬃcient brewer.

• Glass carafe models:

· Should be turned oﬀ when hot-plate use is no longer desired.

· Optional Auto-oﬀ models will automatically shut oﬀ in 100 minutes.

Now enjoy a perfect cup of coﬀee, brewed to industry standards

with your new Technivorm Moccamaster!

Coﬀee tastes best immediately after brewing!

DIRECTIONS FOR USE

1. Power switch should be in the oﬀ position.

2. Position 9-hole outlet arm as shown in the diagram.

· Attach snuggly to the silicone gasket at the top of the

cool water reservoir.

3. Fill cool water reservoir to the desired level, with fresh ﬁltered

or bottled cool water. Replace cool water reservoir lid.

· Reservoir is marked with the number of European cups: 4 oz. each.

4. Place ﬁlter in brew-basket.

· Place a standard #4 white paper ﬁlter into the brew-basket.

5. Add the appropriate amount of coﬀee.

· For a full 10 cups, we recommend 7 level scoops (2 Tbsp each).

· The SCAA approved industry standard for the perfect cup is

2 tablespoons to every 6 oz. of water.

· We caution against the use of a gold mesh reusable ﬁlter; they tend

to retain coﬀee oils and clog very quickly, resulting in an overﬂow of

the brew-basket and ﬁlter.

6. Place brew-basket on bracket, position outlet arm over center

of brew-basket.

· For manual adjust brew-basket models, adjust slide to open position.

 CAUTION: Brew-basket will overﬂow in a closed position.

· Replace brew-basket lid.

 CAUTION: Scalding may occur if any of these parts are removed

during brew cycle.

7. Carafe placement:

· Place the glass carafe, with lid, on the hot-plate.

· Place thermal carafe, with the “brew-thru-lid” in brew position

beneath the brew-basket bracket. (Carafe should be placed to

depress the white button). We recommend warming the thermal

carafe with hot water before use.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Technivorm KB741 in the language / languages: French, Spanish as an attachment in your email.

The manual is 2,85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technivorm KB741

Technivorm KB741 User Manual - English - 2 pages

Technivorm KB741 User Manual - German, Dutch, French - 2 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Technivorm KB741 Manual

Product: