6.4 Antenna adjustment
To position the antenna in the optimum direction, the receiver is equipped with a signal
strength indicator.
> Press the Menu key to display the Main Menu.
> Now use the arrow keys up/down to select the entry Settings.
> Confirm by pressing OK.
The sub-menu Settings will be displayed.
> Now use the arrow keys up/down to mark the menu line Antenna adjust-
ment.
> Confirm by pressing OK. The menu Antenna adjustment will be displayed.
> Now use the arrow keys left/rightto enter the channel with the weakest recep-
tion signal.
> Now position the antenna in such a way that both bars show a maximum position.
red bar poor reception
yellow bar good reception
green bar excellent reception
7 Operation
7.1 Switching on and off
> You can switch on the digital receiver by pressing the On/Standby key either on the
receiver front panel, or on the remote control.
> Press the same key again, either on the receiver front panel or on the remote control,
to switch the receiver off again.
> The receiver is now in standby mode,and the display on the receiver will show the
time.
If the current time is not shown, this must still be downloaded to the unit. To do this,
switch the receiver on, and set it to a major channel that broadcasts a time signal, for
about 30 seconds to download the time automatically.
7.2 Programme selection
7.2.1 Using the Programme up/down keys
> You can move through the list one slot at a time, up or down, by using the
Programme keys up/down either on the receiver or on the remote control.
7.2.2 Using the numeric keys
> Use the numeric keys to enter the programme number you wish to view.
For example:
1 for programme slot 1
1, then 4 for programme slot 14
2, then 3, then 4 for programme slot 234
When entering multi-digit programme numbers you have approx. 3 seconds after pressing
the key to complete your entry.
If you wish to enter a number consisting of only one or two digits, you can speed up the
selection process by holding down the key of the last digit a little longer.
16
