For daily use
Switching on and off
> Switch on the digital receiver bypressing the On/Standby key, either on the receiver
or on the remote control.
> Press this key again to switch the receiver off.
> The receiver is now in standby mode, the display on the receiver shows the time.
Programme selection
Using the programme up/down keys
> Use the programme keys up/down either on the remote control or on the recei-
ver to move up or down one programme slot at a time.
Using the numeric keys
> Use the numeric keys to enter the desired programme number.
For example
1 for programme slot 1
1, then 4 for programme slot 14
2, then 3, then 4 for programme slot 234
When entering programme numbers consisting of several digits, you have approximately 3
seconds after pressing a key to complete the entry.
If you wish to enter a number consisting of only one or two digits, you can speed up the swit-
ching procedure by keeping the key depressed a little longer on the last digit.
Using the programme list:
> Press OK.
> You can now use the arrow keys up/downto mark the desired programme.
> Press OK to switch to the marked programme.
> Use the arrow keys up/down to move the marker by one line at a time within the
list.
> Use the arrow keys right/leftto move the
marker around the list one page at a time.
Volume control
> You can regulate the volume of your digital receiver: press the key Volume + to
increase the volume, and Volume - to decrease it.
> Press the key Sound on/off to switch the sound on or off (mute).
44
