424665

Technisat digit mf4 t Manual

11
Zoom out
Zoom in
Previous page
1/44
Next page
4 Connections
The references below to items a b c etc. refer to the illustration on page 10.
4.1 Antenna
a The cable coming from the terrestrial antenna (roof-mounted or room antenna) should
be connected with the terrestrial antenna input of the receiver.
Wherever possible please use a roof-mounted antenna. An internal room antenna may
be sufficient under very favourable reception conditions. If an active antenna is being
used, ensure that the antenna feed is switched on (Point 6.2.4).
4.2 Connection to a television set
4.2.1 Using a SCART cable
b Connect your receiver (SCART socket TV) and the television set (SCARTsocket)
by means of a SCARTcable. If your television set is appropriately equipped, this will
switch automatically to AV mode when the digital receiver is switched on, and will thus
switch to DVB-T operation.
4.2.2 Using HF cable
If you wish to continue receiving any analogue programmes that may be available, the digital
receiver must be connected to the antenna input of the television set.
c Connect the receiver (antenna output) with the antenna input socket of the televi-
sion set, using a suitable cable connection.
4.3 Video cassette recorder (VCR)*
d Connect the video recorder to the SCARTsocket VCR. In playback mode, the video
recorder will supply a switching signal to the digital receiver. The video recorder signal
will be supplied automatically to the televison set.
If your video recorder does not supply a switching signal, use the O/AV key to switch
your digital receiver to the external input AV. Press this key again to revert to normal
operation.
4.4 Hi-fi amplifier*
4.4.1 Analogue*
e To enjoy the best possible sound quality, you can connect the digital receiver to a hi-
fi amplifier. Use a suitable cable to connect the cinch sockets Audio R and Audio
L of the digital receiver to an input of the hi-fi amplifier (e.g. CD or AUX; please note
that the Phono input is not suitable!).
4.4.2 Digital*
e If your amplifier is equipped with an appropriate electrical or optical input socket,
connect the socket AUDIO OUT DIGITAL electrical with the electrical input of
your amplifier.
Sampling rates of 32, 44.1 and 48 KHz are provided, depending on the broadcasting station.
In addition, this connection will reproduce the Dolby Digital signal (AC3), where available.
11
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technisat digit mf4 t at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technisat digit mf4 t in the language / languages: English as an attachment in your email.

The manual is 1,4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Technisat digit mf4 t

Technisat digit mf4 t User Manual - German - 62 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info