490788
11
Zoom out
Zoom in
Previous page
1/31
Next page
English - 10 -
Input Selection
Once you have connected external systems to your TV,
you can switch to different input sources.
• Press “
button on your remote control for directly
changing sources.
or
Select Source option from the main menu by
using
or button. Use then or
button to highlight an input and press button
to select.
Note: You can mark desired source options by pressing the
OK button. Therefore, when
button is pressed, only
the marked source options will be available (except for the
TV source).
Basic Operations
You can operate your TV using both the remote
control and onset buttons.
Operation with the Buttons on the TV
Volume Setting
• Press button to decrease volume or
button to increase volume, so a volume level scale
(slider) will be displayed on the screen.
Programme Selection
Press P/CH +button to select the next programme or P/
CH -” button to select the previous programme.
Viewing Main Menu
Press ”/ buttons at the same time to view
main menu. In the Main menu select sub-menu using “P/
CH - or P/CH + buttons and enter the sub-menu using
or “ buttons. To learn the usage of the
menus, refer to the menu system sections.
AV Mode
• Press the TV/AV” button in the control panel on the TV
to switch between AV modes.
Operation with the Remote Control
• The remote control of your TV is designed to control all
the functions of the model you selected. The functions
will be described in accordance with the menu system
of your TV.
Functions of the menu system are described in the
following sections.
Volume Setting
Press button to increase the volume. Press
button to decrease the volume. A volume level
scale (slider) will be displayed on the screen.
Programme Selection (Previous or Next
Programme)
• Press “P -” button to select the previous programme.
• Press “P +” button to select the next programme.
Programme Selection (Direct Access)
Press numeric buttons on the remote control to select
programmes between 0 and 9. The TV will switch to the
selected programme. To select programmes between
10-500 (for IDTV) or 10-199 (for analogue), press the
numeric buttons consecutively
Press directly the programme number to reselect
single digit programmes.
Initial Settings
When the TV is turned on for the rst time, the menu
for the language selection appears on the screen. The
message “Welcome please select your language!” is
displayed in all language options sequentially in the On
Screen Display (OSD).
By pressing the
or buttons highlight the language
you want to set and press OK button. After then, “First
time installation” On Screen Display (OSD) will appear
on the screen. By pressing or buttons, select
the country you want to set and press OK button (* for
EU countries).
Note: Country selection On Screen Display (OSD) will not
be available for UK.
Press OK button on the remote control to continue and the
following message will be displayed on the screen:
To select the Yes or “No option, highlight the item by
using “ ” or “ ” buttons and press the “OK” button.
The IDTV will automatically tune to the UHF or VHF(*)
(* for EU countries) transmission channels, searching
for digital terrestrial TV broadcasts and displaying the
names of channels found. This process will take about
a few minutes.
Downloaded from www.Manualslib.com manuals search engine
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technika 32-2010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technika 32-2010 in the language / languages: English as an attachment in your email.

The manual is 4,94 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info