536112
13
Zoom out
Zoom in
Previous page
1/16
Next page
13
Operations
RQT5763
Edit guide function
A
When recording, the changer will automatically program the
tracks for tape sides A and B in accordance with the length of
the tape so that none of the tracks will be interrupted before
they are completed.
In addition, the program will also include a silent interval of
approximately 4 seconds between tracks.
1
Press [DISC SKIP] to select the disc to be recorded.
2
Prepare the tape deck for recording.
Set the Dolby NR, reverse mode, recording level, etc., as in-
structed in the Operating Instructions for the tape deck.
Note
Rewind the tape so recording is possible from its beginning.
3
Press [EDIT GUIDE] to select the tape length.
Each time you press the button, the display showing the tape
length changes as follows.
C-46 C-60 C-90 C---
Choose the length of the tape you will use.
More precise time settings are also possible.
(Refer to “To enter a desired recording time other than 46, 60
or 90 minutes” below.)
The data of the tracks to be recorded is displayed as shown in
the diagram.
In this example, disc 5 can be recorded with tracks 1-4 on side
A and tracks 5-7 on side B of the cassette tape.
4
Start recording on the tape deck and then immediately:
Press [ ].
When the last track set for recording on side A is finished, the
changer will enter the pause mode. Set the tape to the position
from which recording will begin on side B, and then perform
step
4
once again.
When all the programmed tracks on the specified disc finish
playing, the changer will automatically stop. The edit guide
mode will be cancelled at the same time.
To enter a desired recording time other than 46, 60 or
90 minutes
1. Select “C---” in step
3
.
2. Enter the total recording time in minutes (1-99) using the
numeric buttons.
For example
To use 52-minute tape, press [5] then [2].
You can also specify the tape length by pressing [ ] or [ ]
buttons.
Press either [ ] or [ ] from each step C-46, C-60, C-90 or C---.
For example
To use 52-minute tape, select C-46 and then press and hold [ ]
until the display shows “52”.
The maximum allowable playing time for editing is 99 minutes.
To stop recording
Press [
] and then press the stop button on the tape
deck.
Note
Depending on the disc, a little of the beginning of the next track
may be recorded onto the end of the track.
A
1
3
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4
. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SEC
MIN
TRACK
DISC
TRACK
EDIT
SEC
MIN
EDIT
TRACK
EDIT
Specified disc number
Number of tracks
to be recorded
Tracks to be
recorded
Remaining time on side A
Side A
Number of tracks
to be recorded
Tracks to be
recorded
Side B
Remaining time on side B
SEC
MIN
EDIT
MIN
DISC
EDIT
4
7
2
5
8
3
6
9
0
1
10
10
OPEN CLOSE
POWER
/
I
REPEATSPIRAL
RANDOM MODE
TIME MODE
EDIT GUIDE
ID SCAN
PROGRAM MODE
DISC 1 DISC 2 DISC 3 DISC 4 DISC 5 DISC SKIP
1
4
3
EDIT GUIDE
Side A (30 min)
Side B (30 min)
Track 1
Track 2
Track 3 Track 4
Track 5
Track 6
Track 7
Silent interval between tracks
(approx. 4 seconds)
Example: Recording from a disc containing seven tracks
onto a 60-minute tape.
DISC SKIP
SL-PD9
DISC SKIP
,
SL-PD7A
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SL-PD7A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SL-PD7A in the language / languages: English as an attachment in your email.

The manual is 1,14 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info