536118
8
Zoom out
Zoom in
Previous page
1/12
Next page
RQT7021
8
When the player is to be used for scratch play.
Use the disc slip sheet instead of the turntable mat. This enables
the record to be easily moved during play.
Top (printed side): Lay the record on this side.
Bottom: Slippery side.
For a different kind of slip
Put the transparent sheet under
the disc slip sheet.
Playing records
Preparation
1. Put a record on the turntable.
2. Take off the stylus cover and release the arm clamp.
1 Turn [power] to turn the unit on.
The pilot lamp comes on.
33 1/3 r/min is automatically selected and the indicator lights.
Press [45] if you are playing a 45 r/min record.
2 Press [start-stop].
The turntable starts revolving.
4 Lift the cue lever and move the tone arm
over the record.
5 Lower the cue lever.
The tone arm moves down and play starts.
3 Press [reset] to light the pitch control
green LED lamp.
The pitch returns to 33 1/3 or 45 r/min.
Use the above indicated
pitch for playing standard
music.
To temporarily stop play
Lift the cue lever.
The stylus lifts off the record.
Refer to page 9 for fine adjustments to the pitch
When using EP records
1. Take the EP record adaptor out
of its holder and fit it over the
center spindle.
2. Press [45] to change the speed.
When play finishes
1. Lift the cue lever and move the tone arm back to the arm rest.
2. Press [start-stop].
The electronic brake gently stops the turntable.
3. Turn [power] to turn the unit off.
4. Clamp the tone arm and put the stylus cover back on.
To light up the stylus
Press the stylus light switch. A blue LED light rises up and illumi-
nates the stylus.
When the light is not required, press it down. The light also goes
out.
Press the switch firmly. If the switch is lightly pressed, the light may
come on but not rise up.
1
3
4,5
2
33 45
Indicator
lights
start
stop
33
Cue lever
EP record adaptor
Disc slip sheet
Transparent sheet
Stylus light switch
Stylus light
off
on
p
o
w
e
r
Pilot lamp
Green
LED indicator
reset
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SL-1210M5G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SL-1210M5G in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info