536118
7
Zoom out
Zoom in
Previous page
1/12
Next page
RQT7021
7
Preparatory adjustments
Using the balance weight control
Make note of the balance weight setting for your stylus cartridge,
you can quickly change the stylus pressure without having to re-
adjust the horizontal balance of the arm each time you remove and
re-attach the stylus cartridge.
Attach the cartridge to the tone arm you are using.
Turn the balance weight control to the setting you previously
used to balance the weight including cartridge.
Turn the stylus pressure control dial to the setting you previ-
ously used to balance the weight including cartridge.
Anti-skating
Adjust the dial to the same value as the stylus pressure
control when playing normal music.
For scratch play
Adjust the control to reduce skipping.
Armlift height
Preparation
1. Put a record on the turntable.
2. Take off the stylus cover and release the arm clamp.
Use a screwdriver to turn the armlift screw.
Make this adjustment only if the cartridge you are using makes it
necessary.
Turning the screw clockwise lowers the armlift.
Turning the screw anti-clockwise raises the armlift.
Armlift height (the distance between the record and stylus when the
cue lever is raised) is set to between 8 and 13 millimeters at time of
shipment.
Tone arm height
1. Release the arm lock.
2. Adjust the arm height.
Adjust the ring using the chart
below as reference so the arm
height matches the indicated
height of the cartridge. Mea-
surements are marked on the
arm height control ring in 0.5
millimeter intervals.
Index line
Fit the dust cover
SL-1210M5G
Hold the dust cover with both hands and fit it over the
player from directly above.
SL-1200GLD
Place the dust cover in position from directly above, hold-
ing it at both sides.
For detaching the dust cover, be certain first to raise it as illustrated
before removal.
If you do not know the height of your cartridge, rest the stylus on
a record and adjust the height control until the tone arm and
record are parallel.
3. Lock the arm after adjusting the height.
Armlift screw
Armlift
1
3
Locked
Released
Arm height control ring
Tone arm and record parallel.
Balance weight
measurement units
Cartridge height
(H) in millimeters
17
18
19
20
21
22
23
Height control
position
0
1
2
3
4
5
6
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SL-1210M5G at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SL-1210M5G in the language / languages: English as an attachment in your email.

The manual is 0,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info