637111

Technics SC-CH515 Manual

39
Zoom out
Zoom in
Previous page
1/60
Next page
You can use normal, chrome and metal tapes for recording.
The recording level and the noise reduction effect of the original
(playback) tape will be recorded on the new tape just as they were in
the original recording. 1 3
='1
II,- I d
2 546
I
I "".,
1
O1-DECK-20
• ___--_---_-_Z_ T-
Press INT on the tuner/sound processor to select "TAPE".
[] I
Check that the tape's erasure prevention tabs (see page 57) are
intact, and then insert the cassette into deck 2.
The leader tape must be wound on beforehand. (See page 31 .)
1 _ _ Load cassettes.
For playback: Into deck 1
For recording: Into deck 2
Insert both cassettes with the starting
side facing in front.
2 (_ Press CLOSE to close eachdeck's cassette holder,
ONETOUCH TAPE EDIT
NORMAL HIGH
%%
Press one of ONE TOUCH
TAPE EDIT (NORMAL or HIGH)
to start recording with the de-
sired editing speed.
NORMAL: When you wish to monitor
the sound while recording
HIGH: When you wish to record at
high speed (about 2 times
normal speed)
While recording, both DECK 1 and DECK
2 indicators light. Tape direction indicator
shows the tape direction of deck 2.
After recording has finished, both decks
will stop.
REVERSEMODE Select the desired reverse
_ mode.
: Single-sided recording
C-?,__:Two-sided recording
(forward side--)reverse side)
In case the tape length loaded in
deck 2 is longer than a tape in
deck 1, deck 1 repeats the play-
back until deck 2 completes the
two-sided recording.
(8 times max.)
C_._L_,,_:Two-sided recording
(forward s ide--*reverse side)
-', Press CCRT to activate the
c_c CCRT function.
(See page 31 .)
You can record without using the CCRT
function.
Jr_t';/FJ_
4,
[]
I
Set the tape direction to "D"
on deck 1 and deck 2.
Press DECK 1/2 and confirm both deck's
tape direction are "1>".
To change the tape direction, first press
I>, and then [;3.
To record on the reverse side, set deck 2
to "<3" tape direction. (In this case, be
sure to rewind the tape to the beginning
of the reverse side.)
[] I To stop recording:
Press El.
f_._ Both decks will stop.
To record on the reverse side of the tape:
Set the deck 2 tape direction to <3, and then press NORMAL or
HIGH.
To enjoy another source while recording:
Press D on the compact disc changer or TUNER/BAND on the
tuner/sound processor, and start the sound source.
You can change the volume level and tone quality without affecting
the recording.
For your reference:
For optimum results, use an editing tape of the same or higher
quality than the playback tape.
• Some TV sets generate noise that could be recorded during tape-
to-tape recording. To prevent the possibility of this, do not use this
system close to a TV set.
eDo not press CD edit recording buttons (J.F[T, ALBUM, LAST
FADE) while tape-to-tape recording is in progress. It changes the
tape-to-tape recording to the CD edit recording mode.
eYou cannot expect special tone quality and equalization effects for
tape-to-tape recording.
39
… 39 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SC-CH515 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SC-CH515 in the language / languages: English as an attachment in your email.

The manual is 6,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info