637111
20
Zoom out
Zoom in
Previous page
1/60
Next page
oDo not cover the hole or slits.
Otherwise the incorrect operation will take place.
aDo not insert another disc onto tray placed at (_), although the tray
is partially showing, its disc is in the play position.
Slit Hole
O
you play disc 2)
abe sure to load the discs correctly in the center position as shown
in the drawing.
3" (8 cm) CD
5" (12 cm) CD
ado not touch the carousel or the loading drawer while it is moving.
oDo not turn the tray forcibly by hand because it may fail to operate
normally.
elf the discs are not correctly loaded, playback may not start. In such
a case, reinsert the disc as follows:
1. Switch the power to the standby mode on the amplifier, and
then back on.
2. Press OPEN/CLOSE to open the loading drawer.
3. Load the disc(s) on the tray(s) correctly.
elf you press OPEN/CLOSE while the play indicator (D) is lit in
green, the drawer will open to half position.
To open fully, follow the procedure below.
1. Press [3.
2. Press OPEN/CLOSE to close the loading drawer.
3. Press OPEN/CLOSE again to open the drawer.
ado not move this changer with a compact disc inside the unit. If a
disc comes off the disc tray, it might be scratched or the changer
might become incapable of playing.
To select the desired discs
Press DISC 1, DISC 2 or DISC 3
____ to select the disc which
you
want to play.
The play will automatically start from the
first track of the disc you select.
To confirm the total playing time of the disc
currently playing
ISPLAY
Press DISPLAY.
The display will change (as described
below) each time you press the button.
In the stop mode:
O The display shows the total playing
time of the disc currently playing.
(_) The display shows the disc number
and the total track number of the disc
currently playing.
l_ --
_==_ o ,-'l l ,:-'r_._._ 0
In the play mode:
(_) The display shows the track number
of the disc currently playing.
: :-'&_ & -18I- ':' ,? _>1
J
(_) The display shows the elapsed time
of the track currently playing.
1
_'_ _ _ - - I'-/. '-' ' [_>
To exchange discs during play
While a disc is playing, you can exchange discs.
1. Press OPEN/CLOSE during playing.
The loading drawer will open at half position.
2. Exchange the discs.
3. Press OPEN/CLOSE again to close the loading drawer.
After the last track on the current disc finishes playing, the changer
will play all the remaining disc(s) loaded, and then stop.
If you play a disc with the loading drawer open, the changer will
automatically stop when the last track on the current disc finishes
playing.
20
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technics SC-CH515 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technics SC-CH515 in the language / languages: English as an attachment in your email.

The manual is 6,65 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info