[VOLUME]
Volume control.
[MEMORY]
For presetting radio stations.
[INPUT SELECTOR]
For selecting input.
[TAPE MONITOR]
For monitoring sound when recording to a 3 head cassette deck.
Also used when you have connected a graphic equalizer to the
TAPE terminals.
[TUNING, 2, 1, PTY SELECTOR]
TUNING;
For tuning the radio and selecting preset stations.
Press and hold until the frequency starts scrolling to start
automatic tuning. Tuning stops when a station is found.
PTY SELECTOR;
For changing the PTY display.
[PRESET, PTY SEARCH]
PRESET;
Press to allow preset station selection with [TUNING, 2, 1]
PTY SEARCH;
For starting a PTY search.
[RDS]
Press to use the RDS functions.
[VCR 3]
For a video camera, etc.
[MULTI DECODER]
Light to indicate the source’s input signal and decoding format
used.
DOLBY DIGITAL EX: Dolby Digital Surround EX sources
DOLBY DIGITAL: Dolby Digital sources
DOLBY PRO LOGIC
22
:
Dolby Pro Logic 2 decoder is being used
DTS-ES: DTS-ES discrete or matrix sources
DTS: DTS sources
NEO:6: DTS NEO:6 matrix decoder is being used
Select the DSP
sound mode.
Start play of the
source.
Adjust the
volume.
[-BAND, –FM MODE, DISPLAY MODE ]
-BAND, –FM MODE;
For switching between AM and FM.
If reception is poor in FM, press and hold until “MONO” appears to
switch to monaural mode.
DISPLAY MODE;
For changing the RDS display mode: PS, PTY or RT.
Display (
\
page 14)
For your reference
¡When playing videotapes (connected to VCR 1)
The picture remains on the screen even if you select TAPE, CD,
MD/CD-R, TUNER or PHONO.
¡Once you have set a mode (DSP, AUTO/DIGITAL/ANALOG
input, or 2-channel/6-channel input) for an input source
That mode is engaged whenever you reselect the input source.
¡When using a graphic equalizer
Some distortion may occur, depending on the equalizer’s
settings.
¡When SPEAKERS B is on
The STEREO DSP SOUND mode is engaged automatically.
¡When you finish listening
Be sure to reduce the volume and press [8] to switch the unit
to standby.
¡When DTS FIX mode is on
You cannot use ENHANCED SURROUND and DTS-ES signals
will be played through 5.1 channels (i.e., there will be no sound
from the surround back speaker).
¡When input is DIGITAL
The tape monitor cannot be used.
(
\
pages 16 and 17)
Step 1
Step 2
Step 3
Step 4
Before use
Others
Reference
