8
Install Steps
⚫ Mark the drill holes by holding the foot of the wall bracket at the desired
mounting location and marking the hole positions.
⚫ Use a drill with a 6 mm drill bit to drill the required holes and insert the plugs
and insert the wall plugs flush with the wall.
⚫ Screw the wall bracket to the wall using the supplied screws.
⚫ Mount the house on the tripod screw and screw the house a little way on (about
three turns).
⚫ Turn the house in the desired direction and lock it with the lock nut.
⚫ To move the house into its final position, undo the pivot bolt a little, position the
house and fix the position by tightening the pivot bolt again.
Wall mount with mounting belt
Use the mounting belt and the wall mount to hang up the house to any object (e.g.
tree) you can get the belt around.
Pull the belt through the rectangular oblong holes of the wall mount bottom and
put the belt around the desired object. Now fasten the belt. Screw the installed
bird house on the screw at the bottom of the bird house of the bracket and fix it
and adjust the position of the bird house.
Railing mount
Use the railing mount to mount the house to any round railing with a diameter
between 17-32mm. Unscrew the tightener. Put the U-angled screw around the
railing. Now fasten the tightener again. Screw the installed bird house on the
screw at the bottom of the bird house of the bracket and fix it and adjust the
position of the bird house.
