795866
20
Zoom out
Zoom in
Previous page
1/40
Next page
TROUBLESHOOTING
No Power on
Fault connection  Turn the inverters power switch off; Verify cable are
tightly connected to the inverter and the power source
Battery voltage below 10V  Recharge or replace battery
Equipment being operated draws too much power  Allow the inverter to
cool down. Ensure there’s adequate ventilation around the inverter. Ensure
that load is no more than it’s maximum rating for continuous operation
Low Voltage alarm turns on immediately
The input voltage at input of the Inverter needs to be raised 
Recharge/Replace battery or add additional batteries. Run the vehicle engine
when using a 12V DC plug
Low voltage arm is on all the time
Power battery condition with voltage drops  Replace battery
Inadequate power or voltage drops  Check condition of battery cables
and cable leads. Clean or replace as necessary
Low power output
Battery condition may be poor  Recharge or replace a battery
Fault connection  Make sure the battery and Inverter terminal are clean
Inverter does not work after connecting the cables in reverse
The internal protection has disabled the inverter  Contact vendor
company for help
Enjoy your product * Share your experience and opinion on one of the
well-known internet portals
20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Technaxx TE16 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Technaxx TE16 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info