Manual Technaxx TE16 (page 19 of 40) (English, German, Dutch, French, Italian)

795866

Zoom out

Zoom in

1/40

Overload Protection (Red LED on Inverter)

The Inverter will automatically shut down if the continuous draw exceeds its

maximum wattage rating. When the Inverter is at or near maximum output, an

alarm will sound. When the alarm sounds you need to disconnect the device(s)

to bring the Inverter output down to an acceptable level.

If you continue to use the Inverter at or near the maximum output, it will

eventually overheat and shut down. If you exceed the maximum Inverter

output, the alarm will sound and the Inverter will automatically shut down. The

red fault indicator will light and the alarm will continue to sound. The Inverter

must be reset after an overload condition.

Temperature protection

The Inverter is equipped with a cooling fan. Depending upon the load output

and the temperature of the Inverter, the cooling fan will turn on and off as

required to cool the Inverter if needed. If the temperature reaches

approximately 80°C the Inverter will shut down automatically. Turn off the

Inverter and allow it to cool for a minimum of 15 minutes. Before starting up

again, verify the total wattage of the devices being powered.

To reset the inverter

1. Turn off the Inverter using the ON/OFF switch on the Inverter, depending

upon how the Inverter was controlled.

2. Unplug all devices.

3. Turn the Inverter back on using the ON/OFF switch on the Inverter. Before

devices are reconnected, verify the total wattage of the devices to ensure they

are less than the rating of the Inverter.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Technaxx TE16 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 0.34 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Technaxx TE16 Manual

Product: