Manual Team VX-2412 (page 13 of 31) (English, German, Dutch, Spanish)

749136

Zoom out

Zoom in

1/31

English TEAM VX-2412

EnglishVX-2412

For PTT transmission hold the PTT key while talking at a distance of approxi-

mately 10 cm into the microphone. For details about the VOX mode, see the

section VOX mode.

VOX Mode

VOX stands for voice-operated-transmission, i.e. no PTT key is needed for

transmitting a signal. This feature allows hand-free operation. In some Euro-

pean countries, for the driver of a vehicle, it is no longer permitted to operate

mobile devices for communication while driving if hand-operation is required.

To activate/deactivate the VOX mode, press the transmission key [PTT] (1)

and the menu key [EMG] (6) concurrently. The active VOX mode is indicated

by the microphone symbol “ “ in the LCD, which blinks in transmission mode.

We recommend to test the VOX operation while deciding for the best location

of the microphone in the vehicle. For best results you should be able to talk

directly into the microphone.

The VOX sensitivity and the delay time can be adjusted in the menu (see

VOX L and VOX T).

Please note that the VOX function cannot work if the squelch is open.

Reception

The received signal is audible in the speaker of the radio. The s-meter in the

LCD indicates the signal strength.

Please note that the VX-2412 is equipped with CTCSS/DCS. If CTCSS/DCS

is activated for the actual channel, received signals with non-matching CTC-

SS/DCS codes are not audible in the speaker. In active mode, the according

symbol CTCSS or DCS are displayed in the LCD.

Scan

The scan function searches for signals on the actual frequency norm in the

selected modulation mode (AM/FM). Once a signal has been detected the

scan function pauses according to the selected scan mode (squelch/time)

before it automatically returns to active scanning.

To activate the scan function, hold any of the channel selectors until the

symbol SCAN appears in the LCD. All channels are scanned continuously, in

consecutive order. To stop the scan function, push the PTT key.

Once a signal is present the scan function pauses,

in squelch mode : until the signal ends plus the delay time of a few seconds,

in time mode : for approx. 10 seconds, regardless whether the signal has

ended or not. Then, the scan function continues.

Note: you can change the scan-direction during scanning anytime by pressing

the according channel selector key Up [p] or Down [q].

Priority Channel 9/19

The VX-2412 is equipped with two priority channels, these are preset to the

channel numbers 9 [EMG1] and 19 [EMG2].

The priority channel key [EMG] (6) uses a triple switch to change between pri-

ority channel 1, priority channel 2 and the selected channel in regular mode.

FUNCTION MENU

The function menu manages the following list of functions and their settings.

To access the function menu, press the menu key [EMG] (6) until the regular-

mode screen switches to the rst menu function. The function name is dis-

played on the left, next to the current function setting.

To navigate through the list of menu functions, use the channel selector keys.

To access a function for changing the current setting, press the menu key

[EMG] shortly. The current setting of the selected function starts blinking. Use

the channel selectors to change the setting and press the menu key [EMG]

again to save your selection.

The functions CTCSS/DCS and EMG require more than one step for the con-

guration. Nevertheless, the procedure of selecting (with the channel selec-

tors) and conrming (with the menu key [EMG] (6) remains the same.

To exit the menu, press the menu key [EMG] long. Some menu functions

CTCSS/DCS - Menu: CdTSET

CTCSS and DCS lter unwanted signals on busy frequencies. If activated,

only received signals with the same code will pass and will be audible in the

speaker. Please note: CTCSS/DCS is not a security feature. With the monitor

function or an open squelch, CTCSS-/DCS-encoded signals can be heard.

With this function, select the code type rst, i.e. either CTCSS (Ct) or DCS (dt)

and then the according code, i.e. CTCSS: 1-38 and DCS: 1-104.

Beep Tone - Menu: KEyBP

A beep tone, for conrmation of any key entry, can be activated/deactivated.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Team VX-2412 in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 1,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Team VX-2412 Manual

Product: