Manual Team VX-2412 (page 12 of 31) (English, German, Dutch, Spanish)

749136

Zoom out

Zoom in

1/31

English TEAM VX-2412

EnglishVX-2412

OPERATION

On/O󰀨 and Volume Control [On/O󰀨 /Vol] (7)

Switch on the radio by turning the rotary volume selector (7) clockwise. To

adjust a comfortable volume level, deactivate the squelch temporarily (see

section Squelch) and set the volume level.

Keylock [AM/FM] (1)

Activate/deactivate the keylock function by pressing the mode key [AM/FM]

(1) until the keylock symbol appears/disappears in the LCD.

With activated keylock, only the transmission key [PTT] (1) can be operated.

All other keys are deactivated.

Squelch [SQ/AQ] (2)

The typical, permanent frequency noise on a channel that is present when no

carrier is present, can be suppressed with the squelch function.

The radio is equipped with an automatic squelch (AQ) and a manual squelch

(SQ).

A long press of the squelch key [SQ/AQ] (2), switches between the manual

squelch SQ and the automatic squelch AQ. Only the automatic squelch mode

is indicated in the LCD. In active AQ mode, the letters AQ are displayed.

Both squelch modes can be adjusted. After switching the squelch mode, the

function remains for a few seconds in set-mode, the current value is indicated

in the display. To access the set-mode in the current squelch mode, press the

key shortly.

In set-mode, the value can be changed with the channel selector keys of the

microphone or the radio, the value can be changed. For the SQ mode, you

can select the values 1-34 or OFF; the AQ mode can be set in the range 1-9.

Your selection is automatically conrmed by leaving the set-mode. This hap-

pens automatically after 5 seconds or can be done by pressing the transmis-

sion key [PTT] (1).

For the automatic squelch (AQ), we recommend the preset, middle-value.

To set the best, current squelch level, lower the value until you hear the

frequency noise. Then, increase the value until the squelch lters the noise.

In some cases, the squelch opens temporarily and the frequency noise is

audible. In this case, increase the squelch by one level or more.

If the squelch level is too high, weaker signals are ltered and they cannot be

heard in the speaker.

Channel Selection [p] / [q]

For the channel selection use the channel selectors Up [p] or Down [q] at

the radio or at the microphone. The LCD displays the channel number and the

frequency.

Please note that in transmission mode, the channel cannot be switched. Also,

be aware that di󰀨erent stations have to use the same channel (frequency)

and the same operating mode (AM/FM), to be able to communicate with each

other.

Mode Selection [ AM/FM ] (1)

The VX-2412 operates in amplitude (AM) and frequency modulation (FM).

Please note, that the frequency norm CE operates in FM only.

You can toggle between AM and FM by pressing the mode key [AM/FM] (1)

shortly. The active mode (AM/FM) is indicated in the LCD.

Please note: with the frequency norm UK, you switch between CEPT frequen-

cies (EU: AM/FM) and UK frequencies (FM only) with a triple switch. The EU

frequencies are indicated with the symbol U and the UK frequencies with the

symbol UK.

Frequency Norm Selection

The VX-2412 can be set to one of the following frequency norms. It is in the

obligation of the user to select the correct frequency norm that is permitted in

the current area.

Norm Channel and Frequency

DE 80 FM (26.565 - 27.405 MHz), 4 W / 40 AM (26.965 - 27.405 MHz), 4 W

IN 27 FM (26.965 - 27.275 MHz), 4 W / 27 AM (26.965 - 27.275 MHz), 4 W

EU 40 FM (26.965 - 27.405 MHz), 4 W / 40 AM (26.965 - 27.405 MHz), 4 W

CE 40 FM (26.965 - 27.405 MHz), 4 W

U 40 FM (27.60125 - 27.99125 MHz), 4 W / 40 AM/FM (26.965 - 27.405 MHz), 4 W

PL 40 FM (26.960 - 27.400 MHz), 4 W / 40 AM (26.960 - 27.400 MHz), 4 W

I2 36 FM (26.855 - 27.265 MHz), 4 W / 36 AM (26.855 - 27.265 MHz), 4 W

To change the current frequency norm, hold the AM/FM key (1) while turning

the radio on. The current norm symbol (see above) will blink in the LCD. Make

your selection with the channel selectors and conrm your selection by turning

the radio o󰀨.

Regarding the permissions and restrictions of the individual norms

in the various European countries, please check the radio passport,

which is included in the scope of delivery. The user is solely respon-

sible for the selection of the permissible norm in country of operation.

Transmission

The VX-2412 o󰀨ers voice-operated transmission (VOX) and push-to-talk

transmission (PTT).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Team VX-2412 in the language / languages: English, German, Dutch, Spanish as an attachment in your email.

The manual is 1,29 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Team VX-2412 Manual

Product: