487284

Team SIS 8 Manual

11
Zoom out
Zoom in
Previous page
1/40
Next page
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don‟t change
the page numbering. Keep the language integrity.
11 TEAM SIS 8 - 070426
Assembly page 11/40
Fax +32 2 359 95 50
Proceed the same way if the water tank stops working or is damaged. To avoid the risk of
electric shock, do not disassemble the iron or steam tank, take it to a qualified technician
for examination and repair. Incorrect re-assembly can cause a risk of electric shock when
the iron or steam tank is used.
Fully unwind the mains cord and supply hose before starting to iron.
The steam tank switch should always be turned to “0” before plugging or unplugging the
power cord from outlet.
Unplug the appliance and allow the iron and the water tank cool down before cleaning
or storing them and for pressurized steam iron station (depending on the model) before
opening, filling or emptying the water tank.
FOR PRESSURIZED STEAM IRONING STATION (DEPENDING ON THE MODEL), NEVER UNSCREW
THE CAP OF THE STEAM TANK WHILE THE APPLIANCE IS CONNECTED TO THE MAINS WALL
SOCKET AND ESPECIALLY WHEN STEAM IS BEING PRODUCED.
(*)
Competent qualified service: after sales department of the producer or importer or any
person who is qualified, approved and competent to perform this kind of repairs in order to
avoid all danger. In any case you should return the appliance to this service.
STEAM IRON: USE PRECAUTION AND TEMPERATURES
Choose the temperature according to the fabrics. Check the garment's label before
choosing the temperature.
If ironing instructions are missing but you know the kind of fabric, then see the table for
recommended ironing temperatures.
As soon as you plug in the appliance, the iron is switched on, even if you haven't
activated the water tank's switch. The illuminated switch of the water tank (2) switches on
as soon as you press the switch and stays on as long as the switch is on "I" position. Set the
temperature dial of the iron (1) to the desired position. The pilot light of the iron (6) will
come on, indicating that the iron is heating. As soon as the desired temperature is
reached, the pilot light will go out, you can start ironing.
During ironing this pilot light will come on from time to time. When this happens, the
soleplate is being heated-up to the required temperature again. You can continue
ironing.
The table is valid for the fibre materials only. If some kind of finish has been applied (gloss,
wrinkle, relief etc), the textile can best be ironed at a lower temperature. First sort out the
Kind of textile
Temperature dial
Steam ironing
Synthetic (e.g. acetate,
acrylic, viscose,
Polyamide, polyester, ….)
Silk
MIN
NO
Wool

YES
Cotton
Linen

YES
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Team SIS 8 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Team SIS 8 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info