380767

Team rc 6 Manual

11
Zoom out
Zoom in
Previous page
1/36
Next page
Copies of the I/B. Please reproduce them without any
changes except under special instruction from Team
International BELGIUM. The pages must be reproduced and
folded in order to obtain a booklet A5 (+/- 148.5 mm width x
210 mm height). When folding, make sure you keep the good
numbering when you turn the pages of the I/B. Don’t change
the page numbering. Keep the language integrity.
11 TEAM RC 6 - 080519
Assembly page 11/36
Fax +32 2 359 95 50
For chopping, select speed 1 or 2. CAUTION: Do not try to chop very hard food (such as
ice, sugar or coffee grains…).
When you use your appliance in an intensive way, it is necessary to make breaks of at
least 1 minute between every operation to let the motor cool down.
The metal chopping blade is very sharp. You can use the plastic blade cover to store the
chopping blade in a safe way when you have cleaned it after use.
b) Whisking
Do not use the whisking blade to knead heavy dough such as tart pastry or pizza dough.
Make sure that the appliance is unplugged and that the ON/OFF & speed switch is in "0"
position.
Place the processor bowl onto the shaft and make sure that the three squares on top of
the motor block fit into the three notches at the bottom of the bowl.
For whisking, put the whisking blade on the support and place the blade support onto the
shaft.
Put the ingredients into the bowl.
Place the lid with feeding tube onto the processor bowl as indicated in paragraph “Use”
making sure the metal shaft of the blade support gets into the hole in the middle of the lid.
This accessory can be used to whisk egg whites and prepare sauces like mayonnaise or
custard.
Plug in the appliance and turn the ON/OFF & speed switch to speed 1 or 2.
It is possible to add ingredients during process through the funnel of the lid.
When you use your appliance in an intensive way, it is necessary to make breaks of at
least 1 minute between every operation to let the motor cool down.
c) Grating / Slicing
Make sure that the appliance is unplugged and that the ON/OFF & speed switch is in "0"
position.
Place the processor bowl onto the shaft and make sure that the three squares on top of
the motor block fit into the three notches at the bottom of the bowl.
Slide the accessory for grating/slicing onto the support with the grating blade upwards for
grating or with the slicing blade upwards for slicing. Slide the three small pins of the support
into the foreseen holes in the accessory and turn the accessory clockwise until it locks into
place.
Place the whole on the shaft.
Place the lid with feeding tube onto the processor bowl as indicated in paragraph “Use”
making sure the metal shaft of the blade support gets into the hole in the middle of the lid.
Cut the potatoes, carrots, cucumbers etc… into pieces and place the ingredients into the
funnel of the bowl lid.
Use the pusher (6) to push food down the funnel. Never use your fingers or any other utensil.
Plug in the appliance and turn the ON/OFF & speed switch to “1” to start. Adjust the
speed if necessary.
Always turn the ON/OFF & speed switch to “0” and unplug the appliance before emptying
the bowl and be careful when handling the blades, as they are very sharp.
When you use your appliance in an intensive way, it is necessary to make breaks of at
least 1 minute between every operation to let the motor cool down.
CLEANING
Unplug the appliance.
Turn the lid with feeding tube clockwise to take it off.
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Team rc 6 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Team rc 6 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,64 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info