Manual Team rc 6 (page 10 of 36) (English, German, Dutch, French, Italian, Portuguese, Spanish)

380767

Zoom out

Zoom in

1/36



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced and

folded in order to obtain a booklet A5 (+/- 148.5 mm width x

210 mm height). When folding, make sure you keep the good

numbering when you turn the pages of the I/B. Don’t change

the page numbering. Keep the language integrity.

10 TEAM RC 6 - 080519

Assembly page 10/36

Fax +32 2 359 95 50

 Never block the safety device of the appliance.

 The processor bowl can simply be washed under running water.

 Be careful not to hurt you when handling, removing, cleaning or emptying the bowl.

(*)

Competent qualified electrician: after sales department of the producer or importer or any

person who is qualified, approved and competent to perform this kind of repairs in order to

avoid all danger. In any case you should return the appliance to this electrician.

IMPORTANT INFORMATION

This appliance is not designed for professional use. You should follow the requested breaks.

Failure to follow this instruction carefully may result in damage to the motor. Please refer to the

rating label for the maximum continuous usage time (KB xx min in which xx is the maximum

usage time). The breaks should last at least 10 minutes. Any wrong use will invalidate the

guarantee.

USE

Make sure the appliance is unplugged and the ON/OFF & speed switch (1) is in position “0”.

 Place the processor bowl (4) onto the shaft and make sure that the three squares on top

of the motor block fit into the three notches at the bottom of the bowl.

 Make sure the bowl is well fitted, if not, the appliance will not work.

 Depending on the desired preparation, you will have to use various accessories. For more

details, please check the instructions below.

 Place the lid with feeding tube (5) on the bowl in such a way that the arrow  on the lid is

slightly to the left of the arrow  on the bowl and turn it anticlockwise until the arrow on

the lid ends up right above the arrow on the bowl. Caution: as long as the lid is not locked

properly, the appliance will not work.

 Plug in the appliance.

 Turn the ON/OFF & speed switch up to speed 1 or 2 depending on preparations.

 If you wish to use the appliance punctually, turn the ON/OFF & speed switch to position

“P” ("pulse") for one or two seconds. Do not use the pulse function for a longer time. When

you let the switch go, it will switch back to “0” automatically. The pulse function is perfect

for making milkshakes.

FUNCTIONS

a) Chopping

 Make sure that the appliance is unplugged and that the ON/OFF & speed switch is in "0"

position.

 Place the processor bowl onto the shaft and make sure that the three squares on top of

the motor block fit into the three notches at the bottom of the bowl.

 Remove the plastic blade cover of the chopping blade, put the chopping blade (9) on

the support (10) and check if the chopping blade has been firmly attached to the

support.

 Place the blade support with the chopping blade onto the shaft.

 Then put the ingredients into the bowl. We advise you to cut ingredients like meat or

vegetables into pieces beforehand in order to get a homogeneous preparation.

 Place the lid with feeding tube onto the processor bowl as indicated in paragraph “Use”

making sure the metal shaft of the blade support gets into the hole in the middle of the lid.

 Plug in the appliance.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Team rc 6 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Team rc 6 Manual

Product: