Manual Team RC 2 (page 16 of 40) (English, German, Dutch, French, Italian, Portuguese, Spanish)

487218

Zoom out

Zoom in

1/40



Copies of the I/B. Please reproduce them without any

changes except under special instruction from Team

International BELGIUM. The pages must be reproduced and

folded in order to obtain a booklet A5 (+/- 148.5 mm width x

210 mm height). When folding, make sure you keep the good

numbering when you turn the pages of the I/B. Don’t change

the page numbering. Keep the language integrity.

Assembly page 16/40

Fax +32 2 359 95 50

 Depending on the type of food, you can prepare up to 1 kg within one and a half

minute. The operation can be carried out 5 times, with rest periods between each

use.

 Always turn the ON/OFF & speed control switch to “0” and unplug the appliance before

emptying the bowl as blades are very sharp.

b) Chopping / Blending / Kneading

 Make sure the appliance is unplugged, that the on/off & speed control switch is in "0"

position and that the safety lid (1) is closed.

 With the processor bowl already into position, place the metal chopping blade (F) on the

bowl shaft as shown in figure b. Then, put the ingredients in the bowl. To obtain a better

result, cut ingredients such as meat or vegetables first.

 Place the bowl lid on the top of the processor bowl as described in the section «Use».

Make sure the shaft of the blade goes into the hole which is in the centre of the lid.

 Depending on the type of food, you can chop up to 1 kg of foodstuff, including

vegetables, raw or cooked meat, and raw or cooked fish.

 For chopping, plug in the appliance and turn the ON/OFF & speed control switch to “II”

(fast speed). CAUTION: Do not try to chop products that are very hard (ice, sugar, coffee

beans…).

c) Citrus Press Set

 Make sure the appliance is unplugged, that the on/off & speed control switch is in "0"

position and that the safety lid (1) is closed.

 With the processor bowl already into position, place the citrus press shaft (21) on the bowl

shaft as shown in figure c.

 Place the strainer (20) on the processor bowl, then turn the handle until the lid locks into the

bowl lid locking slot (6). After this operation, one should not be able to lift the strainer.

 Place the cone (19) into the hole which is in the strainer as shown in figure c.

 Cut the fruit in half, and put it on to the cone (the inner part against the cone).

 Plug in the appliance and turn ON/OFF & speed control switch to “I” (slow speed) to start

the appliance. For greater control, you can use the pulse button but only if you turn the

ON/OFF speed control switch to “0”. A light press will make the motor work slowly.

 You can squeeze the two halves of the fruit for 30 seconds maximum each time. This

operation can be carried out 10 times, with rest periods between each use.

 Be careful not to exceed the maximum level marked on the bowl and unplug after use.

d) Whisk Stick

Never use the whisk stick (G) to knead heavy dough or prepare mixtures such as pizza dough or

short crust pastry.

 Make sure the appliance is unplugged, that the on/off & speed control switch is in "0"

position and that the safety lid (1) is closed.

 With the processor bowl already into position, place the whisk stick on the bowl shaft as

shown in figure d.

 Place the ingredients in the bowl.

 Place the lid with funnel on the top of the processor bowl as described in the section "Use".

Make sure the shaft of the stick goes into the hole which is in the centre of the lid.

 This accessory has to be used only to whisk the whites of eggs and prepare sauces like

mayonnaise or custard. You can whisk up to 0.5 L of cream each time.

 Plug in the appliance and turn the ON/OFF & speed control switch to “I” (slow speed) to

start the appliance.

 It is possible to add ingredients during process thanks to the funnel of the lid.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Team RC 2 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Team RC 2 Manual

Product: