Manual Team EXP 3 (page 9 of 28) (English, German, Dutch, French, Italian, Portuguese, Spanish)

486866

Zoom out

Zoom in

1/28

Generated by Unregistered Batch DOC TO PDF Converter

2011.3.804.1511, please register!

Copies of the I/B. Please reproduce them without any changes

except under special instruction from Team International

BELGIUM. The page must reproduced and folded in order to

obtain a mini booklet B5 (+/- 150 mm width x 210 mm height).

The page must be folded in order to keep the good numbering



numbering. Keep the languages integrity.

Assembly page 9/28

Fax +32 2 359 95 50



PREPARING THE MACHINE

 Remove all packaging materials.

 Before the first use of the coffee machine, wash the removable parts carefully in warm soapy

water and rinse with clear water.

 Before the first use, it is absolutely necessary to operate the appliance only with water (thrice)

without coffee powder in order to remove possible residue from the machine.

OPERATION

Important: during the use, always check that there is enough water for the preparation in the water

tank.

 Check that the switch is in the OFF position (the side with the white point is up and the lights are

off) and that the appliance is unplugged from the power supply.

 Fill water in the water tank. This one is removable and if you want you can remove it from the

appliance to fill it. Therefore you only have to raise its lid and to pull the handle.

 To place it back, proceed inversely until it stops and close the lid.

 Insert the plug into an appropriate wall socket. Your appliance is now ready for use.

PREPARING ESPRESSO

 According to the required number of cups insert the small filter for one cup or the large filter for

two cups into the filter holder.

 Put the coffee powder special for expresso, that you will find in shops, into the filter. The

amount of coffee can change following your taste but in general it is recommended to fill the

filter completely and press the coffee with the measuring spoon.

 Insert the filter holder into the opening. Therefore, place the handle of the filter holder in front of

the position of the appliance and pull the filter locking device to you. Insert the filter

holder in the opening and turn it to the right until it stops. The handle of the filter holder has to

be in front of the position of the appliance.

 Place one or two cup(s) on the drain and under the release valve of the filter holder.

 

position. The red power pilot light will light up and indicates that the appliance is switched on.

At the same time the yellow heating pilot light lights up indicating that the heating element rises

in temperatures. As soon as it is hot enough, the yellow pilot light turns off.

 Then slide the function switch to position . The pump will start functioning and a few

seconds later the coffee will start coming out through the openings of the filter holder. At the

beginning you can hear that the pump makes more noise than when the water start flowing. This

is absolutely normal.

 When the cup(s) is (are) filled, slide the function switch to position 0 and the water will stop

flowing.

 To prepare other expressos, empty the used coffee in the filter. Therefore you have to remove the

filter holder by turning it to the left. Push the filter locking device in order to block it and beat

the filter holder above the bin. Rinse with clear water and fill the filter again with the desired

amount of coffee.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Team EXP 3 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 0,51 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Team EXP 3 Manual

Product: