VoicePrism User Manual
FX1 AND
FX2 INPUTS
This menu allows you to choose which input is routed to each of the two FX blocks.
Use the tab keys to go back and forth between the two menus and the softknobs to
set the input voices and levels to FX1 and FX2. The
FX2 INPUTS menu has an addi-
tional level which allows you to set the output of FX1 as an input to FX2. When the
level is set to anything other than off, the audio path sketch on the preset will show a
line from that voice to that effect. If you have an auxiliary source you can set its rela-
tive wet levels in these menu tabs as well.
The level setting range is the same for all input sources: Off, -30dB to 0db.
Please note that output levels can be adjusted in the pages under the
MIX button.
18
Effects: FX1 and FX2 Inputs
Key Point:
to get any effect sounds, the input
levels must be configured properly.