658357
72
Zoom out
Zoom in
Previous page
1/89
Next page
71
The Edit Button
TRANSDUCER Tab Overview
The Transducer effects block uses distortion
and steep lters to emulate the sound of radios,
phones and devices that generally degrade the
audio signal.
f TRANSDUCER STYLE
Use the soft knob assigned to this parameter to
choose a Transducer style you like. The Routing
and Gate Threshold parameters are not part of
the style.
f ROUTING:
Selects where the Transducer effect is inserted
into the signal path for maximum exibility. The
options are:
OFF - No routing.
LEAD - Transducer is inserted on the Lead
voice only. Harmonies and Doubling are unaf-
fected.
HARMONY - Transducer is inserted on the
Harmony path only.
VOICES - Transducer is inserted on both the
Lead, Harmony and Doubling voices.
LEAD FX - Transducer is inserted on the Lead
send to the µMod, Delay and Reverb effect
sends. Lead voice will be clean and the effects
will be affected by the Transducer style.
HARM FX - transducer is inserted on the
HARMONY send to the effects. Lead and
Harmony voices will be clean but the effects
driven by only the Harmonies will be affected
by the Transducer style.
f LOW CUT and HIGH CUT
Sets the cut-off frequency for these very steep
low and high shelving lters. TIP: these and the
PRESENCE lters can be used without Distortion
effects to apply more radical EQ to your presets.
f GATE THRESHOLD
A gate, separate from the main Gate under the
Tone button is used to help prevent feedback
when using the Transducer with heavy distortion
or presence ltering that can introduce feedback
in a live environment. This parameter sets how
loud you must sing in order to open the gate.
f DISTORTION TYPE and
DISTORTION AMOUNT
These are pre-congured distortion styles that
range from Overdrive through Saturation and
Distortion and nally, Fuzz. Each has a unique
character. Though these styles have no detailed
controls like the Delay or Reverb tabs for exam-
ple, you can add or reduce the distortion com-
ponent and apply ltering with LOW CUT, HIGH
CUT, and PRESENCE to customize them.
The AMOUNT parameter adjusts the amount of
distortion for the current distortion style. This is
not the same as the IN and OUT GAIN controls
which work on level adjustment. The Distortion
Amount control adjusts the algorithmic distortion
curve that you can further trim with the TRANS-
DUCER IN GAIN and TRANSDUCER OUT
GAIN controls.
Note that your IN GAIN in the Setup menu must
be sufcient in order to hear the correct amount
of distortion present in distorted styles.
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TC Helicon VoiceLive Rack at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TC Helicon VoiceLive Rack in the language / languages: English as an attachment in your email.

The manual is 2,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TC Helicon VoiceLive Rack

TC Helicon VoiceLive Rack User Manual - German - 18 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info