658319
82
Zoom out
Zoom in
Previous page
1/186
Next page
Getting to know VoiceLive 3
VoiceLive 3 – Reference manual (updated 2015-10-20) 79
Expression Pedal tab: Getting the most out of your expression pedal
If you have connected an expression pedal to
your VoiceLive 3, you can define what the ex-
pression pedal should control in each Preset.
Being able to define the expression pedal “tar-
get” in each Preset gives you a lot of flexibility
from one pedal.
Setting the Expression Pedal target
Use the Expression pedal parameter to choose
from many controllable “targets”.
Use the Exp MinPos parameter to define the
parameter value that should be associated
with the minimum (down) position of the ex-
pression pedal.
Use the Exp MaxPos parameter to define the
parameter value that should be associated
with the maximum (up) position of the expres-
sion pedal.
The MinPos and MaxPos parameters can be
useful when you would like to limit the effective
range of the pedal.
For example, if you assign the expression ped-
al to control harmony volume, you may want the
harmonies to turn down slightly when you rock
the pedal all the way back – but not turn them off
completely. To achieve this effect, you would set
MinPos to something higher than 0% (try some-
thing like 50 or 70%). This allows you to make
large (easy to perform) movements with the ped-
al without changing the level of the harmonies
too drastically.
Setting Expression Pedal MinPos and MaxPos
It can be useful to limit the expression pedal
range for parameters such as Guitar Volume,
Harmony Volume, Delay Feedback, Rhythmic
Depth etc.
Working with a second expression pedal
If you want to, you can use a second expression
pedal with your VoiceLive 3. Connect this sec-
ond Expression pedal to the Footswitch jack.
As opposed to the expression pedal connected
to the Expression jack (which can be used dif-
ferently in each Preset), the pedal connected to
the footswitch jack only has a global setting – it
will control all Presets in the same way. To use a
second expression pedal:
Press Setup.
Navigate to the Buttonmap tab.
Select the Footswitch Jack parameter and set
it from Switch-3 to Expression pedal.
Calibrating your expression pedal
If you are connecting an expression pedal, it
must be calibrated.
To enter the calibration screen, press the Set-
up button.
Use the < and > arrows to navigate to the
“Pedal Calibration” tab.
Expression Pedal Calibration
Follow the on-screen instructions.
The Preset tab
The Preset tab allows you to make changes to
the Preset as a whole.
Most importantly, you can adjust the overall lev-
el of the Vocal or Guitar signals within a Preset.
This allows you to balance your Presets so they
all have the same apparent volume.
82


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for TC Helicon Voicelive 3 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of TC Helicon Voicelive 3 in the language / languages: English as an attachment in your email.

The manual is 14,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of TC Helicon Voicelive 3

TC Helicon Voicelive 3 User Manual - German - 202 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info