2. Press ENTER to confirm setting time and enter distance setting:
Press SPEED+ or SPEED- to set distance, preset value is 0.00, range is 0 , 1.00-
99.00, unit is km (mile).
3. Press ENTER to confirm set distance and enter Calories setting:
Press SPEED+ or SPEED- to adjust goal calories, preset value is 0 , range is 0, 10-
9990,unit is calorie.
4. After finish setting, press START to start fitness.
Note: Time, Distance, Calories can be circle setting, when set one of them, the other two
will auto back to 0.
PROGRAM_USER ( can be set by yourself: Speed & Incline)
1. Press ENTER to confirm USER and enter to select U1
~
U4, systems total can store
4sets program
(a) Press SPEED+ or SPEED- to selectU1, U2, U3, U4.
(b) Press ENTER for 3 seconds and enter self-setting, press SPEED+ or SPEED- to
adjust Speed drawing and press INCLINE+ or INCLINE- to adjust Incline
drawing, press ENTER to select next Profile zone adjustment(Total 20 stage).
After finished the management, press ENTER for 3 seconds then can save the
managed value.
2. Press ENTER to select U1 and enter time setting:
Press SPEED+ or SPEED- to set time. Preset time is0:00, range is 0, 20:00-99:00,
unit is minute: second.
3. Press ENTER to confirm time and enter distance setting:
Press SPEED+ or SPEED- to set distance, preset value is 0.00, range is 0 , 1.00-
99.00,unit is km (mile).
4. Press ENTER to confirm distance and enter Calories setting:
Press SPEED+ or SPEED- to set calorie, preset value is 0, range is 0, 10-9990, unit is
calorie.
5. After finish setting, press start to start fitness.
Note: Time, Distance, Calories can be circle setting, when set one of them, the other two
will auto back to 0.
H.R.C 1-3
This program's training goal is HRC, when the center value up to the preset value
you set, the incline and speed will steady and HRC in a range to reach the training
goal.
This HRC program total 3kinds, as 60%, 75% and THR (self-setting) .
Press ENTER to confirm select H.R.C 1-3 and enter to select 60%, 75%, Target Heart
Rate(below as THR).
2014/1/24 V1.0+ T1BT V1.3+BT APP V1.1