586363
17
Zoom out
Zoom in
Previous page
1/80
Next page
Interchangeable heads (Fig 4):
U blade (A)
- Suitable for trimming beard, mous-
tache and sideburns.
- Can be used with or without guide
comb 1, depending on the desired
cutting height.
T blade (B)
- Suitable for nape and extended
areas.
- Can be used with or without guide
comb 2, depending on the desired
cutting height.
Precision blade (C)
- Suitable for precision trimming, to
achieve a perfect finish or making
“drawings” on hair.
- Can be used with or without guide
comb 1, depending on the desired
cutting height.
Nose/ear trimming head (D)
- Suitable for trimming hair from the
nose and ears.
- IMPORTANT: do not insert it more
than 5 mm inside the nose or ears.
- Slowly move in and out while the tri-
mmer revolves to remove the unwan-
ted hair. For improved results, ensure
that the end of the trimming head
touches the skin. This will reduce the
tickling sensation that can be caused
by nasal hair.
Use:
- The appliance can be used directly
connected to the mains, or by using
his batteries.
- Unroll the cable completely before
plugging it in.
- Ensure that the electronic connector
is properly attached to the appliance.
- Connect the appliance to the mains.
- Turn the appliance on, by pressing
the on/off button.
Once you have finished using the
appliance:
- Turn the appliance off, pressing the
on/off button.
- Clean the appliance.
Cleaning
- Disconnect the appliance from the
mains and allow it to cool before
undertaking any cleaning task.
- Remove the head from the appliance.
- Use the cleaning brush (O) to remo-
ve the hair from inside the appliance
and the blades.
- Put the head under running water to
achieve a cleaner result if needed.
- Clean the equipment with a damp
cloth with a few drops of washing-up
liquid and then dry.
- Do not use solvents, or products
with an acid or base pH such as blea-
ch, or abrasive products, for cleaning
the appliance.
- Never submerge the appliance in
water or any other liquid or place it
under running water.
- During the cleaning process, take
special care with the blades, as they
are very sharp.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Taurus Hipnos Power at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Taurus Hipnos Power in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info