586363
16
Zoom out
Zoom in
Previous page
1/80
Next page
during a few seconds.
- Make sure that the appliance is
serviced only by specialist personnel,
and that only original spare parts
or accessories are used to replace
existing parts/accessories.
- Any misuse or failure to follow
the instructions for use renders the
guarantee and the manufacturer’s
liability null and void.
Charging the battery
Caution: A new battery is not fully
charged and must therefore be char-
ged before the appliance is used for
the first time.
- Charge the battery at an atmosphe-
ric temperature of between 4 and
40ºC.
- Plug the charger (L) into the mains.
- Approximately 8 to 10 hours are
needed for a complete charge of the
battery. Never attempt to over charge
the battery (although it is recommen-
ded that the first charge of the battery
be of 10 hours in duration).
- Connect the charger (L) to the char-
ging base (K) or to the appliance (E)
using the sockets in them. The socket
is located at the lower/back part of
the appliance and on the back of the
charging base.
- The pilot light will come on to
indicate that the charger is charging
the battery.
-- When the battery is charged dis-
connect the charger from the mains
supply.
NB: For a long battery life, it is
advisable to charge the battery, only,
when it has run out completely.
Instructions for use
Before use:
- Before using this product for the
first time, it is important to make a
full charge of batteries.
- Prepare the appliance according to
the function you wish to use:
Insertion of cutting head:
- Press down the blade attachment
switch and place the blade head until
it fits correctly. Release the blade
attachment switch (Fig.1).
- To extract the blade head, press
down the blade attachment and pull
out the head.
Insertion of comb guide:
- Guide comb 1 fits in Precision and
U blades only.
- Guide comb 2 fits in T blade only.
- Take the guide comb 1 for both
ends and fit the end of the comb to
the end of the blade head.
- Press in the middle of the comb
until it gets inserted correctly, hearing
a “click”.(Fig.2).
- To extract the comb guide, just
pull out.
- Take the guide comb 2 and fit the
end of the comb to the end of the
blade head.
- Press in the middle of the comb
until it gets inserted correctly, hearing
a “click”
- To remove the guide comb 2 pull
the side of the trimmer comb to get it
removed (Fig.3)
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Taurus Hipnos Power at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Taurus Hipnos Power in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info