587255

Tascam X-48 Manual

41
Zoom out
Zoom in
Previous page
1/68
Next page
Recorder
• Select Meter Mode and press the CHNG button to switch between Pre-Fader
(the default) and Post-Fader.
• Select Meter Range and press the CHNG button to switch between -oo to
0dB (minus infinity to 0dB, the default) -24dB to 0dB or -12dB to 0dB.
These fine dB scales can be useful when sending test tones to the recorder, such as
for aligning the analog I/O card or a Dolby encoder.
• Select Peak Hold to switch this function on or off.
Using Markers
Markers allow you to label sections of a recording for visual reference and to locate back to
later.
Mouse/Keyboard Operation
• To create a marker, click the Edit menu and select New Marker or press the Enter
key on your keyboard's number pad.
• To access a memory location, open the Markers window from the Windows menu.
From here you can select a memory location, rename it and locate to it.
Loop Playback
You can loop a section of the timeline for playback or recording. The loop plays back (with
preroll and postroll settings, if assigned) until the stop button is pressed.
Mouse/Keyboard Operation
• Drag the loop start and stop points to the location you want them. The loop markers
are blue triangles that fill the entire height of the timeline ruler, and are at 0:00:00:00
by default.
• Click the loop button to turn on the loop function.
• Press Play.
Loop Mode
The X-48 has three Loop Modes:
• Play Once and Cue plays through the loop once, then locates to the beginning of the
loop (or pre-roll point if enabled) and stops.
• Play Once and Stop plays through the loop once and then stops at the loop end (or
post-roll point if enabled).
• Play Repeatedly plays through the loop, locates to the beginning of the loop (or
preroll point if enabled) and plays again, repeating until the stop button is pressed.
By default, the Loop mode is set to Play Once and Cue. To change this behavior:
41
… 41 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam X-48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam X-48 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info