587255
39
Zoom out
Zoom in
Previous page
1/68
Next page
Recorder
Front Panel Operation
To enable Auto Input, press the AUTO INPUT button on the front panel.
For All Input mode, hold the SHIFT button while pressing AUTO INPUT.
Putting Individual Tracks into Input
You can put tracks into input mode on a channel-by-channel basis.
From the Mouse/Keyboard interface, click the I button next to any track number.
From the front panel, hold the SHIFT button and press any track arming button.
Record Enable
Mouse/Keyboard Operation
Click on the R button to the right of the track numbers on the left side of the screen
in the Tracks view. The button will flash red to indicate it is ready for record.
Front Panel Operation
Press the Record Enable buttons on the front panel. The Record indicator will flash
on tracks that are ready to record.
Punch Crossfade Time
To avoid an audio click when punching in and out of record, the X-48 automatically fades
into and out of record. This crossfade time is very fast, but prevents an audio pop. The
crossfade time can be set between 0ms (disabled) and 90ms in increments of 10ms:
Mouse/Keyboard Operation
Click on the Windows menu and select Settings. Select the Prefs tab and click the
Punch Crossfades submenu. Select the desired crossfade time.
Front Panel Operation
• Press the PREF button and use the up/down buttons to select Punch Crossfade. Press
the CHNG button, select the desired crossfade time using the up/down buttons and
press CHNG again.
39
39


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam X-48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam X-48 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info