587255
19
Zoom out
Zoom in
Previous page
1/68
Next page
Setup
MX-View
Pre-installed on the X-48 is MX-View Version 1.40, for control of any existing MX-2424
machines you may have. For MX-View operational instructions, please refer to the MX-
View Manual.
TASCAM Mixer Companion
Pre-installed on the X-48 is TASCAM Mixer Companion Version 1.30. This allows the X-
48 to act as the host computer for TMC when connected via USB to a TASCAM DM-3200
or DM-4800 digital mixer.
TMC updates may be installed by running the TMC update installer by selecting Launch
External Application from the X-48’s File menu. The TMC update installer would have to
be on a piece of media that the X-48 has access to, such as a CD or USB flash drive.
Only Version 1.20 or higher (Windows version) is designed to operate on the X-
48. Earlier versions of TMC should not be installed on the X-48.
VST Plug-ins
At the time of this writing, the following plug-ins have been qualified for installation & use
on the X-48. Please check the TASCAM web site for updates.
Waves 5 (using the iLok key)
Antares Auto Tune 4
Using the X-48 System Restore CD
In the event it becomes necessary to use the X-48 System Restore CD to restore your X-48
to its original factory configuration, following the steps below will ensure a smooth restore
process:
1. Back up all audio data. This should already be done as part of a regular workflow.
2. Ensure you have backups of any X-48 software installers or patch updates you may
have downloaded from the TASCAM web site.
3. With the X-48 powered on, insert the System Restore CD then restart the X-48. The
VGA UI doesn’t have to be displayed, all that is required is power to open the drive
tray. If necessary, the X-48 can be forced to shut down by holding the front panel
power button for a few seconds.
4. The X-48 will automatically boot from the System Restore CD and run the X-48
Installer. Please follow the steps in the X-48 Installer screens.
19
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam X-48 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam X-48 in the language / languages: English as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info