617918
68
Zoom out
Zoom in
Previous page
1/84
Next page
68 TASCAM SS-CDR200/SS-R200/SS-R100
4 Press the MULTI JOG dial (or remote control ENTER
button) to open a pop-up window where you can
select the device.
5 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to select the copy
destination device.
NOTE
If the selected device media is still being read,
MEDIA
READ
and a progress bar appear in a pop-up.
If the selected device media is not loaded, after
MEDIA
READ
,
ERROR
and the media type (
CF READ
, etc.)
appears in a pop-up.
6 Press the MULTI JOG dial (or remote control ENTER
button) to open the RIP
SOURCE SELECT
screen.
7 Select the file or folder to copy from the
RIP
SOURCE SELECT
screen. If you select a folder, all
the files in the folder will be copied.
To select multiple files or folders, when the desired
file or folder is selected, press the FUNCTION
button (or remote control FUNC button). Repeat
this for every file and folder.
Checkmarks (
4
) are placed next to selected files
and folders. You can only select multiple files and
folders if they are in the same folder.
To deselect a selected file or folder, press the
FUNCTION button (or remote control FUNC button)
once again.
NOTE
You can select multiple files and folders only within the
same folder, so once you use the FUNCTION button (or
remote control FUNC button) to select the first file or
folder, you will no longer be able to move to a different
folder.
If you are selecting only one file or folder, there is no
need to press the FUNCTION button (or remote control
FUNC button). After selecting the desired file, proceed
to step 5.
8 When you have selected all of the files you want to
copy, press the MULTI JOG dial (or remote control
ENTER button) to confirm the selections and open
the
RIP TARGET SELECT
screen where you can
select the copy destination.
NOTE
If the size of the source exceeds the remaining capacity
of the selected media, or the number of source tracks
would cause the number of files on the selected media
to exceed the limit file, a
CAPACITY OVER
or a
TRACK
OVER
message pop-up will appear accordingly, and you
will not be able to confirm the source selection. If this
occurs, press the STOP button to close the pop-up, and
deselect some source files until the total size or number
is acceptable. Then, press the MULTI JOG dial (or remote
control ENTER button) again.
9 Select the copy destination from the
RIP TARGET
SELECT
screen.
The folders or files will be copied after the selected
folder or file.
10 Press the MULTI JOG dial (or remote control ENTER
button) to confirm the copy destination.
A confirmation pop-up message appears.
NOTE
If there are files with the same name, the following
pop-up message will appear.
After this, the pop-up message disappears and the
CD
menu screen opens.
11 Press the MULTI JOG dial (or remote control ENTER
button) again to start writing to the selected device
media.
-- R I P --
and a progress bar appear in a pop-up
while the files are copied.
When writing is completed, the
CD
menu screen will
reopen.
10 - Copying files between CDs and other media (SS-CDR200)
68


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam SS-CDR100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam SS-CDR100 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info