617918
44
Zoom out
Zoom in
Previous page
1/84
Next page
44 TASCAM SS-CDR200/SS-R200/SS-R100
8
Using the menu
1 Press the MENU [JOG] button (or remote control
MENU button) to open the
MENU
screen.
2 Open the
REC
menu.
3 Select
SYNC
.
4 Press the MULTI JOG dial or , [LOCK] button (or
remote control ENTER or t button) to move the
cursor right to select the value.
5 Turn the MULTI JOG dial (or press the remote
control 5 and b buttons) to turn the sync
recording function ON (default value: OFF).
6 Press the MULTI JOG dial or , [LOCK] button (or
remote control ENTER or t button) to open the
SYNC
setting screen.
7 Set the following items on the
SYNC
setting screen.
LEVEL
Sets the sync level.
Options:
72 dB
24 dB
(default value:
54 dB
)
DELAY
Sets the time (in frames) from when a signal exceeding
the sync level is detected until recording begins (one
frame is 1/75th of a second).
Options:
75f
+75f
(frames, default value:
0f
)
If set to a negative value, that amount of audio prior to
triggering will also be captured.
STOP TIME
Sets the time that the signal must be below the SYNC
LEVEL until recording stops and recording standby
resumes.
Options:
INF
(∞),
5s
30s
(default value:
5s
)
NOTE
When the
DELAY
setting range is converted to seconds, it
is equivalent to ±1.00 seconds.
8 When you have finished making the setting, press
the HOME/DISPLAY button (or remote control
HOME/DISP button) to return to the Home Screen.
NOTE
The sync recording setting is retained even after the
power is turned OFF.
8
Using the remote control SYNC button
Push the remote control SYNC button to open the
SYNC
pop-up window in the Home Screen and turn the function
ON/OFF.
Sync recording operation
When the sync recording function is ON and the unit is in
recording standby, recording will automatically start or
stop according to the level of the input source.
When a signal higher than the sync level is input,
recording will begin automatically. However, recording
will not begin even if input is detected unless there has
been at least one second in which the signal was below
SYNC LEVEL after entering recording standby.
Level
Recording starts
Time
SYNC_L
VL
NOTE
The above explanation is for the case when the
DELAY
setting is
0f
(default value). By changing the
DELAY
setting, you can change the point when recording starts.
When recording, if the input signal stays below the sync
level for the
STOP TIME
, the unit will automatically
switch to the recording standby.
LEVEL
VL
STOP TIME
Recording stops
NOTE
If the
STOP TIME
is set to
INF
, recording standby will not
be entered automatically even if the input signal stays
below the SYNC LEVEL.
5 – Recording
44


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam SS-CDR100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam SS-CDR100 in the language / languages: English as an attachment in your email.

The manual is 3,18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info