617900
48
Zoom out
Zoom in
Previous page
1/64
Next page
48 TASCAM HS-P82
7 – Mark and Locate Functions
Mark functions
Adding marks
One file (take) can have a maximum of 99 marks, including
automatically-created marks.
Use the following two methods to create marks.
Push the
MARK key on the front panel.
Use the auto marker function (see OPTION page on page
39.)
Depending on the auto marker function, marks are
automatically added when a certain audio level is exceeded,
at regular time intervals and when synchronization errors
occur.
Marks are named according to how they were made.
MARK key: MARK XX
Audio level: OVER XX
At time interval: TIME XX
When a synchronization error occurs: UNLK XX
The following automatic marks cannot be turned ON or
OFF.
Recording start point: REC xx
Recording end point: END xx
Pre-recordings start point: PRE xx
Using keys to locate to marks
Press the Ô [Â] or [¯] key while pressing and
holding the SHIFT key to locate to the previous or next
mark.
Mark list screen
Touch the
Mark
List
button on the Home Screen to open
the
MARK
LIST
screen.
NAME button: Touch to reorder the marks by name
descending or ascending.
TIME button: Touch to reorder the marks by time descending
or ascending.
Mark name and mark time buttons: Touch to select the
mark.
Locate buttons (“ ”): Touch one of these to locate to
the corresponding mark.
LIST INFO button: Touch this to see a list of the number of
marks by type in the currently selected take.
RENUMBER button: Renumber the marks. Reorder marks
by time ascending, and change the numbers at the ends
of the mark names to reflect that order.
DELETE button: When a mark is selected, touch the
DE-
LETE
button to erase that mark.
Edit button: When a mark is selected, touch the
Edit
button
to edit that mark.
Scroll buttons: Use these buttons to scroll to the beginning
or end of the list or scroll one page (five lines) forward
or backward. You can also scroll through the list one
line at a time using the DATA dial.
Locating to marks
Touch the “ ” button to locate to that mark.
Viewing mark information
Touch the
LIST
INFO
button on the
MARK
LIST
screen to
open the mark list information screen that shows a list of
the number of marks by type in the currently loaded take.
Touch the
LIST
INFO
button again to return to the
MARK
LIST
screen.
NOTE
After recording, the MARK LIST screen might show a TOTAL
number of marks that is 2 or 3 greater than the sum of the
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-P82 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-P82 in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info