617900
14
Zoom out
Zoom in
Previous page
1/64
Next page
14 TASCAM HS-P82
Touch this part of the screen to open the
PROJECT
(current project/scene take list) screen. (See “Project
operations” on page 32.)
8 SOLO indicators, track numbers, level meters, track
name display and recording functions
A track’s number appears black if it can be used for
recording and gray if it is unavailable. (Availability
depends on the sampling frequency setting.) The track
number areas also act as overload indicators, turning
red during overloads. When the limiter is operating, the
track number areas turn blue.
During playback, the meters show the playback levels.
At all other times, the level of the track input signal is
shown on each track that is enabled for recording.
The track name display areas (4 characters or less)
below the level meters also show the track recording
status.
When the MIC/LINE selection switch is set to MIC 0 or
MIC –25, if you turn the input trim knob, the track name
display area below the meters shows the gain value for a
while.
When the input source is set to a digital input, the
following messages appear:
If there is no corresponding input,
AESx-x
NO
SIGNAL
.
If the input signal differs from the settings made in the
unit,
AESx-x
UNLOCK
.
If the Cbit information of the input signal is no audio,
AESx-x
NOT
AUDIO
.
If the Cbit information of the input signal is non
professional,
AESx-x
NOT
PRO
.
If other Cbit information of the input signal differs
from actual operation mode,
AESx-x
Cbit
ERROR
.
AESx-x NO SIGNAL
AESx-x UNLOCK
If you touch a level meter, that channel is soloed. Yellow
highlighting appears around the level meter and the
number of a channel that is soloed. The level meters of
the other channels are dimmed.
The following settings can be made for the display of
the level meters in the
METER
SETUP
screen from the
MENU
screen.
Peak hold time
Release time
Overload light level
Reference level line display ON/OFF
9 SOLO indicator
If any channel is being soloed, the
SOLO
indicator lights
yellow, and the
SOLO
level knob is shown. Turn the
DATA dial when the channel is soloed to adjust its level
while soloed.
Yellow highlighting appears around the level meter and
the number of a channel that is soloed. The level meters
of the other channels are dimmed.
To choose a channel to solo, touch its level meter.
Home Screen, Playback
Home Screen, Record setting
Home Screen, Recording
2 − Names and functions of parts
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Tascam HS-P82 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Tascam HS-P82 in the language / languages: English as an attachment in your email.

The manual is 8,29 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info